Abstract:The massive accumulation of plastic waste has caused a serious negative impact on the human living environment. Replacing traditional petroleum-based polymers with biobased and biodegradable poly(l-lactic acid) (PLLA) is considered an effective way to solve this problem. However, it is still a great challenge to manufacture PLLA-based composites with high thermal conductivity and excellent mechanical properties via tailoring the microstructures of the blend composites. In the present work, a melt extrusion-stretching method is utilized to fabricate biodegradable PLLA/poly(butylene adipate-co-butylene terephthalate)/carbon nanofiber (PLLA/PBAT/CNF) blend composites. It is found that the incorporation of the extensional flow field induces the formation of multioriented microstructures in the composites, including the oriented PLLA molecular chains, elongated PBAT dispersed phase, and oriented CNFs, which synergistically improve the thermal conductivity and mechanical properties of the blend composites. At a CNF content of 10 wt %, the in-plane thermal conductivity, tensile strength, and elongation at break of the blend composite reach 1.53 Wm–1 K–1, 66.8 MPa, and 56.5%, respectively, which increased by 31.9, 73.5, and 874.1% compared with those of the conventionally hot-compressed sample (1.16 Wm–1 K–1, 38.5 MPa, and 5.8%, respectively). The main mechanism for the improved thermal conductivity is that the multioriented structure promotes the formation of a CNF thermal conductive network in the composites. The strengthening mechanism is attributed to the orientation of both PLLA molecular chains and CNFs in the stretching direction, restricting the movement of PLLA molecular segments around CNFs, and the toughening mechanism is due to the transformation of PLLA molecular chains from low-energy gt conformers to high-energy gg conformers induced by extensional flow field. More interestingly, after the extrusion-stretched samples are annealed, the oriented PLLA molecular chains form oriented crystal structures such as extended-chain lamellae, common "Shish–kebabs," and hybrid Shish–kebabs, which further enhance the thermal conductivity and heat resistance of the samples. This work reveals the effects of the orientation of the matrix molecular chains and crystallites on the thermal conductivity and mechanical properties of composites and provides a new way to prepare high-performance PLLA-based composites with high thermal conductivity, excellent mechanical properties, and high heat resistance.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.biomac.2c00067.DSC characterization, DMA characterization, rheological test characterization, FTIR characterization, and the relevant equations for calculating the crystallinity and thermal enhancement factor (PDF)This article has not yet been cited by other publications.

Formation of highly oriented crystalline structure for polyoxymethylene fiber enables superior intrinsic thermal conductivity

Preparation, mechanical properties and microstructure of polyoxymethylene fiber through melt spinning and hot drawing by using injection-molding grade resins

Thermal Conductivity of Electrospinning Chain-Aligned Polyethylene Oxide (PEO)

Phase Morphology and Mechanical Properties of the Electrospun Polyoxymethylene/polyurethane Blend Fiber Mats

Novel Polyethylene Fibers of Very High Thermal Conductivity Enabled by Amorphous Restructuring.

Effects of glass fiber reinforcing and thermal post‐treatment on the mechanical properties and crystallization behaviors of polyoxymethylene

Poly(vinyl alcohol) Fibrils with Highly Oriented Amorphous Chains Developed in Electrospun Nanofibers

Thermal Treatment Induced Crystal Development and Crystal Orientation Change in Electrospun Coaxial Fibers Comprising Dual Crystalline Polymers

The Role of Halloy Site on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene-Oxide)/halloysite Nanocomposites

A General Strategy to Electrospin Nanofibers with Ultrahigh Molecular Chain Orientation

INFLUENCE OF HEAT TREATMENT ON CRYSTALLIZATION BEHAVIOR OF POM

Preparation of High Modulus and High Strength Fiber by Zone-annealing Method

Covalently linked polydopamine-modified boron nitride nanosheets/polyimide composite fibers with enhanced heat diffusion and mechanical behaviors

An efficient thermal interface material with anisotropy orientation and high through-plane thermal conductivity

The influence of formation temperatures on the crystal structure and mechanical properties of ultrahigh-molecular-weight polyethylene/high-density polyethylene-blend fibers prepared by melt spinning

Heat-setting Effect on the Morphology and Phase Structures of PPS Nonwovens

Fabricating High-Thermal-Conductivity, High-Strength, and High-Toughness Polylactic Acid-Based Blend Composites via Constructing Multioriented Microstructures

Polymer Nanofibers with Outstanding Thermal Conductivity and Thermal Stability: Fundamental Linkage between Molecular Characteristics and Macroscopic Thermal Properties

Constructing highly oriented and condensed shish-kebab crystalline structure of HDPE/UHMWPE blends via intense stretching process:Achieving high mechanical properties and in-plane thermal conductivity

Tropocollagen Inspired Hierarchical Spiral Structure of Organic Fibers in Epoxy Bulk for Three‐dimensional High Thermal Conductivity

Improving the mechanical properties and thermal conductivity of mesophase-pitch-based carbon fibers by controlling the temperature in industrial spinning equipment