Abstract:A series of substantially improved heat resistant PLLA/P34HB blend fibers with low P34HB content (≤ 8 wt.%) is fabricated with excellent spinnability via melt‐spinning and hot‐drawing processes, due to substantial increase in crystallinity of PLLA. Specifically, amorphous P34HB phase promotes crystal growth of PLLA rather than heterogeneous nucleation, resulting in the significantly enhanced crystallinity of PLLA. Blending high content of polyhydroxyalkanoates (PHAs ≥ 30 wt.%) with polylactide (PLA) provides an effective strategy to significantly improve heat resistance of PLA fibers. However, it has proven challenging to maintain good spinnability of the PLA/PHAs blends with the high content of PHAs. In this study, a series of poly(L‐lactide) (PLLA)/poly[(R)‐3‐hydroxybutyrate‐co‐4‐hydroxybutyrate] (P34HB) blend fibers with low P34HB content (≤ 8 wt.%) is successfully fabricated with excellent spinnability. The incorporation of P34HB contributes to a substantially improved heat resistance of the PLLA/P34HB blend fibers, as evidenced by a notable reduction in boiling water shrinkage from ca. 80% to 9%. This exceptionally improved heat resistance is closely related to substantial increase in crystallinity of PLLA in the blend fibers. Specifically, the addition of low P34HB content remarkably enhances chain mobility of PLLA chains, as such reduces crystallization half‐times (t1/2) and accelerates crystallization of PLLA. In fact, the amorphous P34HB phase favors crystal growth of PLLA phase rather than heterogeneous nucleation inferred previously. These results provide a facile and effective method to produce PLLA/P34HB blend fibers with enhanced heat resistance and sound spinnability.

Preparation of Elastic Poly(R-3-Hydroxybutyrate-Co-R-3-Hydroxyhexanoate) Fiber with High Strength and Regulation of Its Mechanical Properties

Biobased Poly(ethylene-co-hexamethylene 2,5-Furandicarboxylate) (PEHF) Copolyesters with Superior Tensile Properties

Mechanical Properties and Ordered Structure of Bacterial Poly(3-Hydroxybutyrate-Co-3-Hydroxyhexanoate) Fibers Stretched after Isothermal Crystallization Near Tg

Plasticizer Effect of Dibutyl Phthalate on the Morphology and Mechanical Properties of Hard Elastic Poly(Vinylidene Fluoride) Fibers

Melt-spun Microbial Poly(3-Hydroxybutyrate-co-3-hydroxyvalerate) Fibers with Enhanced Toughness: Synergistic Effect of Heterogeneous Nucleation, Long-Chain Branching and Drawing Process.

Preparation and Properties of Bacterial Poly (3-Hydroxybutyrate-co-3-hydroxyvalerate) Fibers

Effects Of L-Phenylalanine As A Nucleation Agent On The Nonisothermal Crystallization, Melting Behavior, And Mechanical Properties Of Poly(3-Hydroxybutyrate-Co-3-Hydroxyhexanoate)

Enhanced crystallization and storage stability of mechanical properties of biosynthesized poly (3-hydroxybutyrate-co-3-hydroxyhexanate) induced by self-nucleation

Mechanical Properties of Poly(3-hydrobutyrate-co-hydroxyvalerate)/ Biodegradable Hyperbranched Poly(ester Amide) Blends

Different Thermal Behaviors of Microbial Polyesters Poly(3-Hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) and Poly(3-Hydroxybutyrate-co-3-hydroxyhexanoate)

Preparation of High Modulus and High Strength Fiber by Zone-annealing Method

Toughening of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) by phenyl terminated hyperbranched polyesters with higher thermal stability

Preparation of High-Modulus and High-Strength Poly(Ethylene-Terephthalate) Fiber by Zone Annealing

Preparation of High-Modulus Poly(ethylene Terephthalate) Fibers by Vibrating Hot Drawing

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Properties and structure of polylactide/poly (3-hydroxybutyrate- co -3-hydroxyvalerate) (PLA/PHBV) blend fibers

Tailoring compatibility and toughness of microbial poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/bio-based polyester elastomer blends by epoxy-terminated hyperbranched polyester

Effect of Poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) on the Crystalline Properties of Poly (L-lactic acid)

Effect of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) on the Crystalline Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Effect of Epoxy Chain Extender and Multiple Processing on Poly-(R)-3-Hydroxybutyrate's Properties

Toward heat resistant polylactide blend fibers via incorporation of low poly[(R)‐3‐hydroxybutyrate‐co‐4‐hydroxybutyrate] content