Abstract:The present paper is aimed at introducing our research work on a biopolymer known as Poly(3-hydroxybutyrate-co-hydroxyvalerate)(PHBV),a bacterial derived biopolyester.As a nice candidate material used in tissue engineering,the application of PHBV should be promoted.Therefore,we have done an investigation on the cytobiocompatibility of PHBV material with 3-(4,5 dimethylthiazole-2-yl)-2,5-diphenyl tertrazolium bromide(MTT) assay in this paper.As an engineering practice,PHBV leaches used to be prepared first at normal(37 ℃) temperature for 72 hours and high(121 ℃) temperature for 1 hour in conformity with the Chinese national standard GB/T 16886.12.And PVC material was used for positive control as a rule.In order to determine the effects of PHBV on the cell growth,BHK-21 cells of mice were cultivated directly in the animal culture media(RPMI1640) containing either PHBV films or different concentrations of PHBV leaches at 37 ℃ and 5% CO_2 for one,three and five days.The optical density(OD) of BHK-21 cells was then measured and the relative growth rate(RGR) of cells was calculated based on the results of MTT assay.The cytobiocompatibility of PHBV was evaluated according to ISO10993 and GB/T16886.Our experimental results show that the toxicity grades of PHBV proves all zero,whereas the toxicity grades of PVC material used as the positive controls were as high as three or four.Thus,it can be seen that BHK-21 cell growth was not affected by PHBV material.The zero grade of PHBV leach at high temperature also indicated that it has a good chemical stability in a circumstance at high temperature.All the above results can prove that PHBV has a good cytobiocompatibility in vitro.

Preparation and Properties of Bacterial Poly (3-Hydroxybutyrate-co-3-hydroxyvalerate) Fibers

Mechanical Properties and Ordered Structure of Bacterial Poly(3-Hydroxybutyrate-Co-3-Hydroxyhexanoate) Fibers Stretched after Isothermal Crystallization Near Tg

Plasticizer Effect of Dibutyl Phthalate on the Morphology and Mechanical Properties of Hard Elastic Poly(Vinylidene Fluoride) Fibers

Melt-spun Microbial Poly(3-Hydroxybutyrate-co-3-hydroxyvalerate) Fibers with Enhanced Toughness: Synergistic Effect of Heterogeneous Nucleation, Long-Chain Branching and Drawing Process.

Properties and structure of polylactide/poly (3-hydroxybutyrate- co -3-hydroxyvalerate) (PLA/PHBV) blend fibers

Preparation of Elastic Poly(R-3-Hydroxybutyrate-Co-R-3-Hydroxyhexanoate) Fiber with High Strength and Regulation of Its Mechanical Properties

Thermal Properties and Biodegradability Studies of Poly(3-hydroxybutyrate- Co -3-Hydroxyvalerate)

Poly(3-Hydroxybutyrate- co-3-Hydroxyvalerate) Self-Reinforced Composites via Solvent-Induced Interfiber Welding of Nanofibers

Mechanical Properties of Poly(3-hydrobutyrate-co-hydroxyvalerate)/ Biodegradable Hyperbranched Poly(ester Amide) Blends

Evaluation of PHBHHx and PHBV/PLA Fibers Used As Medical Sutures.

Different Thermal Behaviors of Microbial Polyesters Poly(3-Hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) and Poly(3-Hydroxybutyrate-co-3-hydroxyhexanoate)

Effect of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) on the Crystalline Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Study of Poly(3-Hydroxybutyrate-Co-3-Hydroxyvalerate) (phbv)/bamboo Pulp Fiber Composites: Effects of Nucleation Agent and Compatibilizer

Relation of 3HV fraction and thermomechanical properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) produced by Azotobacter vinelandii OP

Degradation of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Reinforced with Regenerated Cellulose Fibers

Effect of PHBV‐g‐MA compatibilizer on the properties of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/polylactide blend/Diss fibers biocomposites

Tailoring compatibility and toughness of microbial poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/bio-based polyester elastomer blends by epoxy-terminated hyperbranched polyester

Toughening of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) by phenyl terminated hyperbranched polyesters with higher thermal stability

Development and Characterisation of Composites Prepared from PHBV Compounded with Organic Waste Reinforcements, and Their Soil Biodegradation

Fully biodegradable poly(3-hydroxybutyrate-co-hydroxyvalerate)/poly(ethylene succinate) blends: Phase behavior, crystallization and mechanical properties

Evaluation on cytotoxicity of biodegradable material-PHBV in vitro