Abstract:(TiVCrNbSiTaBY)N high entropy alloy nitride (HEAN) coatings have been deposited onto Si (100) and cemented carbide substrates by radio frequency magnetron sputtering. The deposition is carried out at different bias voltages to study its influence on microstructure, morphology, mechanical properties and tribological behaviour of the coatings. Grazing Incidence X-Ray Diffraction (GIXRD) technique shows that all coatings exhibit single NaCl-type face-centered cubic (FCC) crystal structure, while the preferred orientation of the crystal structure is greatly affected by the bias voltages. High resolution transmission electron microscopy (TEM) reveals that the structure of the coatings is a mixture of amorphous-like phase and FCC crystal structure, which is in agreement with GIXRD data. Cross-sectional Scanning Electron Microscopy (SEM) images exhibit that the columnar structure of the coatings gradually transforms into a featureless dense structure with the increase of bias voltage. SEM and Atomic Force Microscopy reveal that the surface morphology become smoother with increasing bias voltage. The (TiVCrNbSiTaBY)N HEAN coating deposited at a specific bias voltage exhibit a high hardness of 32.2 GPa. The friction coefficient is significantly influenced by the variation of the coatings surface roughness. Tribological tests for coating deposited without and at low bias voltage show that the wear behavior of the coatings is severe abrasive wear and adhesive wear, while at high bias voltage the slight abrasive wear appears. By applying the substrate bias voltage, the (TiVCrNbSiTaBY)N coatings exhibit excellent mechanical and tribological performance, which can be a promising candidate for protective coating in cutting tools or components.

Effects of Substrate Bias on Structure and Mechanical Properties of (alcrnbsitiv)n Coatings

Effects of substrate bias on the structure and mechanical properties of (Al 1.5 CrNb 0.5 Si 0.5 Ti)N x coatings

Effects of Substrate Temperature and Post-Annealing on Microstructure and Properties of (alcrnbsitiv)n Coatings

Effect of Substrate Bias on the Structure and Properties of Multi-Element (alcrtatizr)n Coatings

Effects of Substrate Bias on Structure and Mechanical Properties of Alcrtiwnbta Coatings

Influence of substrate bias, deposition temperature and post-deposition annealing on the structure and properties of multi-principal-component (AlCrMoSiTi)N coatings

Effect of substrate bias on structure and properties of (AlTiCrZrNb)N high-entropy alloy nitride coatings through arc ion plating

Effect of bias voltages on microstructure and mechanical properties of (AlCrNbSiTi)N high entropy alloy nitride coatings deposited by arc ion plating

Influence of Nitrogen Content and Bias Voltage on Residual Stress and the Tribological and Mechanical Properties of CrAlN Films

Structure and Properties of Two Al–Cr–Nb–Si–Ti High-Entropy Nitride Coatings

Effect of Substrate Bias on the Microstructure and Properties of Non-Equimolar (alcrsitizr)n Films with Different Cr/Zr Ratios Deposited Using Reactive Direct Current Magnetron Sputtering

Influence of Substrate Bias on Properties of TiN Films with X-ray Photoelectron Spectroscopy and Atomic Force Microscopy Studies

Structural and Mechanical Properties of Multi-Element (alcrmotatizr)nx Coatings by Reactive Magnetron Sputtering

Effects of Nitrogen Flow Ratio on the Structure and Properties of Reactively Sputtered (almonbsitativzr)n(x) Coatings

Effects of nitrogen content on structure and mechanical properties of multi-element (AlCrNbSiTiV)N coating

Nitride Films Deposited from an Equimolar Al–Cr–Mo–Si–Ti Alloy Target by Reactive Direct Current Magnetron Sputtering

Effect of bias voltages on microstructure and properties of (TiVCrNbSiTaBY)N high entropy alloy nitride coatings deposited by RF magnetron sputtering

Effect of Nitrogen Content and Substrate Bias on Mechanical and Corrosion Properties of High-Entropy Films (Alcrsitizr)100−xnx

Influence of Substrate Bias Voltage on (ti, Cr)N Films Fabricated by Vacuum Cathodic Arc Deposition

Effects of substrate bias voltage on the critical failure load of Cr-Al-N coatings

Investigation of deposition parameters on the structural properties and hardness of TiAlN films deposited via reactive pulsed DC magnetron sputteringInvestigation of deposition parameters on structural properties and hardness of TiAlN films deposited by reactive pulsed DC magnetron sputtering