Abstract:Self-standing iron nanowires were fabricated at the apex of a tungsten needle tip by electron beam induced deposition. This sharp needle tip which adhered to the nanowire can be moved with a stepping motor and piezo-driving device, and was attached inside a specially designed transmission electron microscope specimen holder. A copper conductor substrate, with which the approaching nanowires will build up a closed electric circuit, was set on the holder. The tungsten needle tip accompanied with the EBICVD nanowires made contact with the substrate and then a voltage was applied between the two electrodes. Resistivity values of the examined nanowires, by a devised Lock-in-Amplifier circuit, range from 0.1 m to 103 m. Our investigation might have implications in the fabrication and characterization of nano-electronics device. Precursor with phenanthrene (C4H10) was used and the deposition experiment was done using a scanning electron microscope at room temperature. It was found that the surface structure at the top of the nanorod, such as a small protrusion within only several nanometers scale, has significant influence on the field emission property. An emission current of several tens of nano-ampere flowing through this nanorod could induce resistance heating. In several minutes, this thermal energy could transform the original amorphous carbon into a graphite-like structure embedded with fullerenes. The turn-on voltage of the graphite-like nanorod was about 11 V less than that of the original amorphous case.

Resistivity and Field Electron Emission of Nanowires Formed by Electron Beam Induced Chemical Vapor Deposition

In Situ Fabrication and Graphitization of Amorphous Carbon Nanowires and Their Electrical Properties

Field Electron Emission from Single Carbon Nanorod Fabricated by Electron Beam Induced Deposition

Carbon Nanostructure on A Tungsten Needle Tip Formed by Electron Beam Induced Deposition and Its Graphitization Through Resistive Heating

Probing Field Emission from Boron Carbide Nanowires

Carbon Nanostructures Formation by Electron Beam Induced Deposition at the Apex of Tungsten Needle Tip

Field Emission From Short And Stubby Vertically Aligned Carbon Nanotubes

Needle-Shaped Silicon Carbide Nanowires: Synthesis and Field Electron Emission Properties

Stable, Self-Ballasting Field Emission from Zinc Oxide Nanowires Grown on an Array of Vertically Aligned Carbon Nanofibers

The Field-Emission and Current−Voltage Characteristics of Individual W5O14 Nanowires

Thermally Induced Transfiguration of Polymer Nanowires under Irradiation of Electron Beams

J212025 Fabrication of Nanowire Surface Fastener on Flexible Substrate and Its Electrical and Mechanical Properties

Copper Nanowires Preparation and Field Electron Emission Properties

Carbon Nanotubes And Their Potential Field Emission Applications

High FE current density from tungsten oxide nanowires

Carbon Nanotubes As Field Emission Sources

LaB6 Nanowires and Their Field Emission Properties

Fabrication of ZnO Nanowires by Vapor-Phase Deposition and Their Field Emission Properties

Field Emission from Single-Crystalline Hfc Nanowires

Field Emission Microscopy Study of Zinc Oxide Nanowires on Tungsten Tip

Resistivity measurements of nanorods formed by electron beam-induced deposition