Abstract:In this work, we quantify field emission properties of cathodes made from carbon nanotube (CNT) fibers. The cathodes were arranged in different configurations to determine the effect of cathode geometry on the emission properties. Various geometries were investigated including: 1) flat cut fiber tip, 2) folded fiber, 3) looped fiber and 4) and fibers wound around a cylinder. We employ a custom field emission microscope to quantify I-V characteristics in combination with laterally-resolved field-dependent electron emission area. Additionally we look at the very early emission stages, first when a CNT fiber is turned on for the first time which is then followed by multiple ramp-up/down. Upon the first turn on, all fibers demonstrated limited and discrete emission area. During ramping runs, all CNT fibers underwent multiple (minor and/or major) breakdowns which improved emission properties in that turn-on field decreased, field enhancement factor and emission area both increased. It is proposed that breakdowns are responsible for removing initially undesirable emission sites caused by stray fibers higher than average. This initial breakdown process gives way to a larger emission area that is created when the CNT fiber sub components unfold and align with the electric field. Our results form the basis for careful evaluation of CNT fiber cathodes for dc or low frequency pulsed power systems in which large uniform area emission is required, or for narrow beam high frequency applications in which high brightness is a must.

Field Emission From Short And Stubby Vertically Aligned Carbon Nanotubes

In-situ studies of electron field emission of single carbon nanotubes inside the TEM

Plasma Enhanced Chemical Vapour Deposited Carbon Nanotubes for Field Emission Applications

Lateral Field Emitters Fabricated Using Carbon Nanotubes

Field Electron Emission From Individual Carbon Nanotubes Of A Vertically Aligned Array

Growth of Aligned Multiwall Carbon Nanotubes and the Effect of Adsorbates on the Field Emission Properties

Hot electron field emission via individually transistor-ballasted carbon nanotube arrays.

Fabrication of Carbon Nanotube Lateral Field Emitters

Carbon Nanotubes As Field Emission Sources

High Emission Current Density, Vertically Aligned Carbon Nanotube Mesh, Field Emitter Array

Enhanced Electron Field Emission in B-doped Carbon Nanotubes

The study of field emission properties of an individual carbon nanotube

Carbon Nanotubes And Their Potential Field Emission Applications

Field emission from single multi-wall carbon nanotubes

Fabrication and electrical characteristics of carbon nanotube field emission microcathodes with an integrated gate electrode

Fabrication and Field Emission Property Studies of Vertically Aligned Multiwalled Carbon Nanotubes Grown by Double Plasma Chemical Vapour Deposition Technique

Field Emission Of Carbon Nanotubes Grown On Carbon Cloth

Large Field Emission Current from Carbon Nanotube Emitter Arrays Growth on Cobalt Film

Field emission of individual carbon nanotubes on tungsten tips

Field Electron Emission Properties from Aligned Carbon Nanotube Bundles of Different Density

Field emission microscopy of carbon nanotube fibers: evaluating and interpreting spatial emission