Abstract:Self-standing iron nanowires were fabricated at the apex of a tungsten needle tip by electron beam induced deposition. This sharp needle tip which adhered to the nanowire can be moved with a stepping motor and piezo-driving device, and was attached inside a specially designed transmission electron microscope specimen holder. A copper conductor substrate, with which the approaching nanowires will build up a closed electric circuit, was set on the holder. The tungsten needle tip accompanied with the EBICVD nanowires made contact with the substrate and then a voltage was applied between the two electrodes. Resistivity values of the examined nanowires, by a devised Lock-in-Amplifier circuit, range from 0.1 m to 103 m. Our investigation might have implications in the fabrication and characterization of nano-electronics device. Precursor with phenanthrene (C4H10) was used and the deposition experiment was done using a scanning electron microscope at room temperature. It was found that the surface structure at the top of the nanorod, such as a small protrusion within only several nanometers scale, has significant influence on the field emission property. An emission current of several tens of nano-ampere flowing through this nanorod could induce resistance heating. In several minutes, this thermal energy could transform the original amorphous carbon into a graphite-like structure embedded with fullerenes. The turn-on voltage of the graphite-like nanorod was about 11 V less than that of the original amorphous case.

Carbon Nanostructure on A Tungsten Needle Tip Formed by Electron Beam Induced Deposition and Its Graphitization Through Resistive Heating

Carbon Nanostructures Formation by Electron Beam Induced Deposition at the Apex of Tungsten Needle Tip

In Situ Fabrication and Graphitization of Amorphous Carbon Nanowires and Their Electrical Properties

Field Electron Emission from Single Carbon Nanorod Fabricated by Electron Beam Induced Deposition

Resistivity and Field Electron Emission of Nanowires Formed by Electron Beam Induced Chemical Vapor Deposition

Fabrication and Characterization of Gated Carbon Nanotube Emitters in A Trench Structure

High-Resolution Transmission Electron Microscopy Imaging Of Carbon Nanostructures

Carbon Welding by Ultrafast Joule Heating.

Growth of well-crystallized segmented graphite nanofibers by catalytic chemical vapor deposition

Preparation and Characterization of a Graphite Electrode Containing Carbon Nanotubes Grown in Situ by Flame Synthesis

A New Method to Fabricate Large Amount of Single-Walled Carbon Nanotubes

Hybrid tungsten-carbon 2D nanostructures via in situ gasification of carbon substrates driven by ebeam irradiation of WO2.9microparticles

Assembly of Carbon Nanotube Onto Scanning Tunneling Microscope Tips

E-beam Induced Carbon Nanowires in TEM

Growth of Tungsten Nanodendrites on SiO2 Substrate Using Electron-Beam-induced Deposition.

Effects of Heat Treatment on Electric Properties of Nanorods Formed by Electron Beam-Induced Deposition

The Engineering of Hot Carbon Nanotubes with a Focused Electron Beam

Carbon Nanotubes Synthesized By Rapid Quenching Of Red-Hot Graphite Rod In Ethyl Alcohol

Fabrication and structural characterization of diamond-coated tungsten tips

Recrystallization of tungsten wire for fabrication of sharp and stable nanoprobe and field-emitter tips.

Interface Dynamic Behavior Between a Carbon Nanotube and Metal Electrode