Abstract:The corrosion and leakage issues of rapid quench boilers have become increasingly prominent in ethylene plants, significantly disrupting the regular functioning of equipment. In pursuit of a more efficacious corrosion protection strategy, a study was conducted on the heat exchange tubes experiencing corrosion leakage in the quenching boiler of a petrochemical company. By means of macroscopic observation, chemical composition analysis, mechanical property analysis, metallographic analysis, fracture surface morphology observation, and energy spectrum analysis, combined with on-site process parameters, a comprehensive analysis of the failure causes of the corroded leakage sites was conducted. It was concluded that the perforation of the heat exchange tubes was caused by high-temperature oxygen corrosion and oxidation induced by scale accumulation, and reasonable countermeasures were proposed. According to X-ray diffraction analysis (XRD), it was found that the scale mainly consisted of Fe2O3 and Fe3O4, and the scale formation time was relatively long. It is speculated that the accumulation of scale is caused by the rust from the upstream equipment pipelines of the boiler water being carried into the quenching boiler with the fluid flow and accumulating at this location. Regarding the heat exchange tubes, the primary causes of failure are high-temperature oxygen corrosion and oxidation. To verify whether the relevant reactions can occur spontaneously, the critical transition temperature of the reactions is calculated using the free entropy function method. The calculated critical temperature for the occurrence of high-temperature oxygen corrosion and oxidation in the heat exchange tubes under failure conditions is determined to be T ＜ 1058 K ~ 785 °C. Therefore, under the conditions of heat exchange tube failure, high-temperature oxygen corrosion and oxidation can occur spontaneously.

ANALYSIS FOR LEAKAGE OF HEAT EXCHANGERS USING IN CENTRAL AIR-CONDITIONING UNITS WITH LITHIUM BROMIDE

A laboratory study of the failure analysis of copper tube used in the air conditioning heat exchanger

Cause Analyses of the Weld Seam Cracks of a Prehydrogenating Reactor

STUDY ON LITHULM-BROMIDE AQUEOUS SOLIYTION AIR-PRECOOLED ADIABATIC ABSORPTION PROCESS

Analysis of Cooling Water Quality in Lithium Bromide Absorption Water Chiller

Analysis on failure tube bundles of domestic air cooler used in hydrocracking unit

Failure Analysis on Abnormal Leakage of Shell and Tube Heat Exchanger in Specialty Chemical Plant

Study on Stress Intensity of Welding Parts of Small Dlameter Tube to Reheater in Coal-burning Thermo-electric Factory with 200 MW Power

Experimental and simulative failure analysis of reformer furnace outlet manifolds serviced in aromatic plant

Stress Corrosion Cracking of Heat Exchanger Tubes in District Heating System

Analysis of the causes of the cracking of tube bundles of 316L stainless steel Shell-and-Tube heat exchanger

Cause Analysis of Crack Initiated in Inner Surface of Heating Tube in External Heat Absorber

Corrosion failure analysis of the heat exchanger in a hot water heating boiler

Failure analysis of a 304 stainless steel heat exchanger in liquid sulfur recovery units

Failure Analysis on Cracking of a HMn58-2 Copper Cooler

Failure Analysis on Fin Tube Corrosion of Air-cooled Heat Exchanger

Failure Analysis and Countermeasure of Heat Exchangers in Nuclear Power Facility

Failure Analysis on Abnormal Bursting of Heat Transfer Tubes in Spiral-Wound Heat Exchanger for Nuclear Power Plant

FRACTURE ANALYSIS OF THE PIPES FOR EXCHANGING BOILER'S SURPLUS HEAT

The Stress Corrosion Cracking of Austenitic Stainless Steel Heat Exchange Tubes: Three Cases Study

Failure analysis of a rapid quench boiler for ethylene cracker