Abstract:Air-cooled single effect LiBr-H2O absorption chiller has shown advantages in residential solar cooling applications. It can be driven by common non-focusing solar collectors, and save water, maintenance expense and space, due to the absence of cooling tower. However, there is no available small capacity commercial air-cooled LiBr-H2O absorption chiller yet, because of the crystallization risk and difficulty of miniaturization. In this work, a novel air-cooled single effect LiBr-H2O absorption chiller with adiabatic flash evaporator and adiabatic absorber was fabricated and tested. The secondary heat exchanging between refrigerant water and chilled water is avoided by introducing the adiabatic flash process, therefore the conventional chilled water circulation pump and the heat transfer pipes in evaporator are removed. In this way, it is capable of improving the COP and cooling capacity with a lower size and cost of material, as well as less electricity consumption. Furthermore, three sets of experiments were conducted with different operating conditions. The evaporation temperature at 8.6 degrees C can be achieved and it is able to control the indoor air temperature to 26.6 degrees C with a raised evaporation temperature at 14.5 degrees C when the ambient temperature is 35 degrees C. The cooling capacity and COP under low and high ambient temperature are 5.3 kW/0.72 and 4.6 kW/0.65, respectively. When the hot water temperature is raised from 80 degrees C to 90 degrees C, the thermal COP is ranged from 0.76 to 0.64. During the 9 h outdoor experiment, the average thermal COP of this prototype is 0.65. In addition, the average cooling capacity is about 5 kW and the average COPele of this prototype reaches 8.3 during the test.

Analysis of Cooling Water Quality in Lithium Bromide Absorption Water Chiller

APPLICATION OF REFRIGERATING MACHINE BASED ON LITHIUM BROMIDE IN CIRCULATING SYSTEM OF HAT

ANALYSIS FOR LEAKAGE OF HEAT EXCHANGERS USING IN CENTRAL AIR-CONDITIONING UNITS WITH LITHIUM BROMIDE

STUDY ON LITHULM-BROMIDE AQUEOUS SOLIYTION AIR-PRECOOLED ADIABATIC ABSORPTION PROCESS

Absorption capability of non-pumped LiBr absorption chiller

Heat Current Method-Based Modeling and Optimization of the Single Effect Lithium Bromide Absorption Chiller

Experimental and Analytical Study on an Air-Cooled Single Effect Libr-H2o Absorption Chiller Driven by Evacuated Glass Tube Solar Collector for Cooling Application in Residential Buildings

Concentration Measurement of Lithium Bromide Aqueous Solution by Electrical Resistivity

Effect of Reclaimed Wastewater Quality on Corrosion of Cooling Water Circulation System

Research on structure and algorithm of high energy efficiency water chiller

Research and application progress of electrochemical water quality stabilization technology for recirculating cooling water in China: A short review

Performance Analysis and Improvement of Air-to-water Chiller for Application in Wide Ambient Temperature Range

Experimental Investigation on a Novel Air-Cooled Single Effect LiBr-H2O Absorption Chiller with Adiabatic Flash Evaporator and Adiabatic Absorber for Residential Application

Analysis on Membrane Heat Exchanger Applied to Absorption Chiller

Influence Study on Chilled Water on the Performance of the Waste Heat Driven Double-effect LiBr Absorption Chiller by Simulation

Evaluation of pH in Absorption Chillers for LiBr Water Solution

Analysis of the Minimum Activation Temperature of LiBr-H_2O Absorption Chiller

Experimental Analysis of an Internally-Cooled Liquid Desiccant Dehumidifier

Design and Performance Prediction of a New Generation Adsorption Chiller Using Composite Adsorbent

Experimental Study on an Adsorption Chiller Employing Lithium Chloride in Silica Gel and Methanol

A survey of cooling tower water quality for condenser tube fouling potential