Abstract:In this study, the influence of pipe materials on chlorine decay, trihalomethanes formation, as well as on microbial community composition of the biofilms formed on the pipe walls in a model full-scale water distribution system was investigated. The chlorine decay experiment showed that the turbulent flow model fitted the experiment data of chlorine decay well, with stainless steel pipe that had the highest rate constant of chlorine decay, and followed by ductile iron pipe and polyethylene pipe. Meanwhile, the formation of trihalomethanes under the three different pipe materials followed the order as: polyethylene pipe > ductile iron pipe > stainless steel pipe. Microbial community analysis showed that biofilm from polyethylene pipe had much higher diversity than that from the ductile iron pipe and stainless steel pipe. In addition, clear differences in the bacterial community structure among biofilms of different pipe materials were observed. The ductile iron pipe biofilm was mainly composed of Enhydrobacter (33.84%) , Propionibacterium (8.08%) and Acinetobacter (5.59%). The polyethylene pipe biofilm contained Sphingomonas (25.25%), Streptococcus (7.64%), Ralstonia (4.83%), Pseudomonas (4.63%), and Escherichia – Shigella (4.71%). The stainless steel pipe biofilm was abundant with Flavobacterium (24.76%), Arcicella (12.03%), and Acidovorax (8.98%). Moreover, the occurrence of opportunistic pathogens was detected, especially in the biofilm of polyethylene pipe, followed by ductile iron pipe and stainless steel pipe. The integrated findings in this study suggest that ductile iron pipe and stainless steel pipe are more suitable as plumbing material than polyethylene pipe in drinking water distribution systems. Graphical Abstract

Chlorine Decay and Trihalomethanes Formation in Water Distribution System

Second-order Chlorine Decay and Trihalomethanes Formation in a Pilot-Scale Water Distribution Systems.

THE EFFECT OF FACTORS ON CHLORINE DECAY AND TRIHALOMETHANE FORMATION IN A PLOT-SCALE DISTRIBUTION SYSTEM

Chlorine decay and THMs formation models based on pilot-scale water distribution system

Desalinated Seawater into Pilot-Scale Drinking Water Distribution System: Chlorine Decay and Trihalomethanes Formation

Effect of water supply pipe wall corrosion on chlorine decay

Chlorine Decay and Trihalomethane Formation Following Ferrate(vi) Preoxidation and Chlorination of Drinking Water.

The dependence of chlorine decay and DBP formation kinetics on pipe flow properties in drinking water distribution.

Chlorine wall decay coefficients calibration of water distribution quality model

Effects of Bromide Ions on Chlorine Demand-based Prediction of Trihalomethanes Formation under Rechlorination Conditions

Chlorine Decay in Water Supply Pipelines: Impact of Nitrogen Concentration in the Source Waters

Factors Affecting the Formation of DBPs by Chlorine Disinfection in Water Distribution System

Modeling the decay of combined chlorine in simulated distribution system

Influences of Pipe Materials and Hydraulic Conditions on the Process of Trihalomethanes Formation in Water Distribution Network

Modeling of Residual Chlorine in Water Distribution System

The mixed-order chlorine decay model with an analytical solution and corresponding trihalomethane generation model in drinking water

Effect of pipe materials on chlorine decay, trihalomethanes formation, and bacterial communities in pilot-scale water distribution systems

The Effect of Membrane Treatment on Chlorine Decay and Trihalomethanes Formation in Water Distribution Systems

Chlorine decay models and influencing factors

Modeling and Elucidation the Effects of Iron Deposits on Chlorine Decay and Trihalomethane Formation in Drinking Water Distribution System.

Modeling decay of chloramines residuals by copper pipe distribution test loop system