Abstract:Method of soft metal (Cu) strengthening of Ti3SiC2 was conducted to increase the hardness and improve the wear resistance of Ti3SiC2. Ti3SiC2/Cu composites containing 15 vol.% Cu were fabricated by Spark Plasma Sintering (SPS) in a vacuum. The effect of the sintering temperature on the phase composition, microstructure and mechanical properties of the composites was investigated in detail. The as-synthesized composites were thoroughly characterized by scanning electron micrography (SEM), optical micrography (OM) and X-ray diffractometry (XRD), respectively. The results indicated that the constituent of the Ti3SiC2/Cu composites sintered at different temperatures included Ti3SiC2, Cu3Si and TiC. The formation of Cu3Si and TiC originated from the reaction between Ti3SiC2 and Cu, which was induced by the presence of Cu and the de-intercalation of Si atoms Ti3SiC2. OM analysis showed that with the increase in the sintering temperature, the reaction between Ti3SiC2 and Cu was severe, leading to the Ti3SiC2 getting smaller and smaller. SEM measurements illustrated that the uniformity of the microstructure distribution of the composites was restricted by the agglomeration of Cu, controlling the mechanical behaviors of the composites. At 1000 °C, the distribution of Cu in the composites was relatively even; thus, the composites exhibited the highest density, relatively high hardness and compressive strength. The relationships of the temperature, the current and the axial dimension with the time during the sintering process were further discussed. Additionally, a schematic illustration was proposed to explain the related sintering characteristic of the composites sintered by SPS. The as-synthesized Ti3SiC2/Cu composites were expected to improve the wear resistance of polycrystalline Ti3SiC2.

Rapid fabrication of the Ti3SiC2 bonded diamond composite by spark plasma sintering

Reaction mechanism of Ti3SiC2 formed on the diamond

Reaction Mechanism of Ti<SUB>3</SUB>SiC<SUB>2</SUB> Formed on the Diamond

Fabrication of Cu/TiC Bonded Diamond Composite by Reaction Sintering

In-situ synthesis TiC + TiB/Ti composites by spark plasma sintering

Rapid Synthesis of Ti Alloy with B Addition by Spark Plasma Sintering

Fabrication of Ti2AlC ceramic bonded diamond composites by self-propagation high temperature sintering

Effects of Diamond on the Mechanical Properties and Thermal Conductivity of Si3N4 Composites Fabricated Using Spark Plasma Sintering

An Investigation on the Spark Plasma Sintering Diffusion Bonding of Diamond/Cu Composites with a Cr Interlayer

Microstructure and mechanical behaviour of transient liquid phase spark plasma sintered B4C–SiC–TiB2 composites from a B4C–TiSi2 system

Fabrication and Mechanical Properties of HAp/Ti<sub>3</sub>SiC<sub>2</sub> (60 vol.%) Composite by Sparkle Plasma Sintering

Effect of TiH2 Content on the Interfacial Reaction Layer Characteristics and Wear Resistance of Diamond/Cu-Sn-Ti Composites Prepared by Spark Plasma Sintering

Spark Plasma Sintering Reaction Synthesized Tib Reinforced Titanium Matrix Composites

Fabrication and mechanical properties of HAp/Ti3SiC2 (60 vol.%) composite by Sparkle Plasma Sintering

Thermal conduction and strength of diamond-copper composite sandwich obtained by SPS diffusion bonding with Ti interlayer

Diamond–SiC nanocomposites sintered from a mixture of diamond and silicon nanopowders

Rapid synthesis of ultrafine WC-Co cemented carbides by in-situ reactions and spark plasma sintering

Fabrication and characterization of highly thermal conductive Si3N4/diamond composite materials

Fabrication of high purity Ti3SiC2 from Ti/Si/C with the aids of Al by spark plasma sintering

Strengthening and toughening of Ti 5 Si 3 by TiC-coated short carbon fiber: Fabrication, interfacial control, and mechanism of reinforcement

Microstructure and Mechanical Properties of Composites Obtained by Spark Plasma Sintering of Ti3SiC2-15 vol.%Cu Mixtures