Abstract:A high-performance micromachined piezoresistive accelerometer, consisting of two axially stressed tiny beams combined with a central supporting cantilever, is developed for both much higher sensitivity and much broader bandwidth compared with conventional beam-mass piezoresistive accelerometers. With the pure axial-deformation scheme of the tiny beams, the developed accelerometer shows improvements in both sensitivity and resonant frequency. An analytic model is established for the pure axial-deformation condition of the tiny beams by adjusting the distance between the tiny beams and the central supporting cantilever. The specifications of the device, such as sensitivity and resonant frequency etc, are theoretically calculated. The analytic model is verified by using simulation of the finite element method (FEM), resulting in satisfactory agreement. Based on a figure of merit (the product of the sensitivity and the square of the resonant frequency), optimized design rules are obtained for the sensors of various measure-ranges from 0.25g to 25 000g. The accelerometers are fabricated by using silicon bulk micromachining technology. The formed 2.5g devices are characterized with a typical sensitivity of 106 mV/5 V/g and first mode resonant frequency of 1115 Hz. The testing results agree well with the design, thereby verifying the high performance of the proposed accelerometer. The developed sensors with the axially stressed tiny-beam scheme show obviously improved specifications, compared with previously published results.

A Micromachined Piezoresistive Angular Rate Sensor with a Composite Beam Structure

Composite Cantilever Beam-Mass Structure Gyroscope by A Novel Etching Technology

A Bulk Micromachined Gyroscope With Improved Quality-Factors At Atmospheric Pressure

An Electrostatically-driven Capacitively-sensed Frame Microgyroscope Fabricated with an Improved Process Flow

Dual Beam-Mass Structure Gyroscope Micromachined by Deep Rie Process

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

A Piezoresistive Accelerometer with a Novel Vertical Beam Structure

A High-Performance Micromachined Piezoresistive Accelerometer with Axially Stressed Tiny Beams

A Novel Microelectromechanical Resonant Gyroscope

A piezoresistive micro-accelerometer with high frequency response and low transverse effect

A novel bulk micromachined gyroscope based on a rectangular beam-mass structure

A micromachined silicon resonant accelerometer

A Micromechanical Structure Eliminating Lateral Effect of Silicon Accelerometer

Development of a High-Performance Microaccelerometer With Position Independent Pure-Axial Stressed Piezoresistive Beams

High Linearity Piezoresistance Micromachining Accelerometer with Low Range

A Novel Tri-Axial Piezoelectric MEMS Accelerometer with Folded Beams

Design of a Micro-Electro Mechanical System Quad Mass Gyroscope with Compliant Mechanical Amplification

A Novel Silicon Micromachined Gyroscope With High Q At Atmosphere

(100) Composite Beam Structure Formed by Masked-Maskless Etch of Silicon

Analysis On Twin-Mass Structure For A Piezoresistive Accelerometer

Design of a Biaxial High-G Piezoresistive Accelerometer with a Tension–Compression Structure