Abstract:When HVDC system operates in monopolar mode and uses the earth as a return path,the electrode current with the magnitude of several kiloamperes can cause significant potential difference between different locations.Meanwhile,there may be direct currents flowing through the power transformers with neutral points grounded,which results in a series of harmful consequences.Under heavy saturation due to DC bias,lots of magnetic flux will be pushed out of the iron core and pass through leakage paths consisting of insulation media and metal parts.Taking the example of a simplified power system with a 105 MVA/220 kV three-phase three-limb transformer,some simulation results regarding the estimation of Manapouri transformer performance for no load case when HVDC earth return current is presented.Instead of using either a branch impedance or an admittance matrix to represent the iron core of transformer,the coupled electromagnetic method based on the core topology is adopted and a three-phase three-limb transformer model has been established.It can represent transformer characteristics very accurately with properly decided parameters.In this model, the loop equations which relate the loop flux to the externally applied magnetomotive forces with reluctances as coefficients are obtained.The effects of transformer leakage paths are modelled by constant magnetic reluctances and discussed in detail.The results with different magnitudes of these leakage reluctances show that the characteristics of leakage paths would influence the immunity of three-phase three-limb transformer from DC biasing current.Since such type of transformer will also be affected by DC biasing current when the reluctances of leakage paths are not large enough,the leakage paths should be considered carefully during the design and manufacture of power transformer.

Design of Power Supply for Testing on Power Transformer of DC Bias

Design of Power Supply for Relay Testing Instrument Based on Micro-computer

Research on Testing of Over-exciting to Evaluate the Tolerated DC Currents of Transformers

Effect of DC Magnetic Biasing on the Temperature Rise of High-voltage Winding of Power Transformer

Magnetic Flux Bias Compensation Based on Voltage Injection Method With an Auxiliary DC/DC Converter

Experimental Study On Dc Biasing Impact On Transformer'S Vibration And Sound

A design of high-power supply installed on transmission lines

Analysis of Excitation Characteristics of Transformers with Different Core Shapes under Severe DC Bias

ELECTROMAGNETIC AND THERMAL CHARACTERISTICS SIMULATION FOR THREE-PHASE THREE-LIMB TRANSFORMERS UNDER DC MAGNETIC BIAS

Research on the Withstand Performance of Three-phase Three-limb Power Transformer under DC Current Biasing

THE INFLUENCE OF CURRENT TRANSFORMER SATURATION ON BUS PROTECTION

MAGNETIC RESTRAINING DIFFERENTIAL BUS PROTECT

Simulation and Experimental Analysis of Single-phase Transformers under DC Bias

Research And Design Of Power-Supply Coil For On-Line Monitoring System

Analysis of Transient Saturation and Sympathetic Inrush of Transformers

Switching Power Supply Design Key Point

Research and Application on One Time Through-Flow Test Methods of HVDC Converter Rheological

Research on DC Magnetic Biasing Characteristic of Converter Transformer for AC/DC Corridor-Sharing Power Transmission System

Simulation and Experiment Research on the Effects of DC-Bias Current on the 500kV Power Transformer

Electromagnetic Vibration Characteristics of High-Frequency Transformer under DC Bias with Different Winding Structures

Research on power transformer vibration and noise under DC bias condition