Abstract:When HVDC system operates in monopolar mode and uses the earth as a return path,the electrode current with the magnitude of several kiloamperes can cause significant potential difference between different locations.Meanwhile,there may be direct currents flowing through the power transformers with neutral points grounded,which results in a series of harmful consequences.Under heavy saturation due to DC bias,lots of magnetic flux will be pushed out of the iron core and pass through leakage paths consisting of insulation media and metal parts.Taking the example of a simplified power system with a 105 MVA/220 kV three-phase three-limb transformer,some simulation results regarding the estimation of Manapouri transformer performance for no load case when HVDC earth return current is presented.Instead of using either a branch impedance or an admittance matrix to represent the iron core of transformer,the coupled electromagnetic method based on the core topology is adopted and a three-phase three-limb transformer model has been established.It can represent transformer characteristics very accurately with properly decided parameters.In this model, the loop equations which relate the loop flux to the externally applied magnetomotive forces with reluctances as coefficients are obtained.The effects of transformer leakage paths are modelled by constant magnetic reluctances and discussed in detail.The results with different magnitudes of these leakage reluctances show that the characteristics of leakage paths would influence the immunity of three-phase three-limb transformer from DC biasing current.Since such type of transformer will also be affected by DC biasing current when the reluctances of leakage paths are not large enough,the leakage paths should be considered carefully during the design and manufacture of power transformer.

Research on DC Magnetic Biasing Characteristic of Converter Transformer for AC/DC Corridor-Sharing Power Transmission System

Analysis and Optimized Suppression of DC Bias in Large AC Power Grid

A Comprehensive Coupled Methodology for Calculation and Suppression of DC Bias in UHVDC Transmission Systems

A Review of Research on Transformer DC Bias Caused by HVDC Transmission

Effects of Transformer DC Bias and the Relationship Between UHVDC Grounding Current and Grounding Resistances

Magnetic Flux Bias Compensation Based on Voltage Injection Method With an Auxiliary DC/DC Converter

Train-earth-grid coupling DC magnetic bias model for stray current diffusion

Analysis of Electromagnetic Interference on DC Line From Parallel AC Line in Close Proximity

Research on the Withstand Performance of Three-phase Three-limb Power Transformer under DC Current Biasing

Steady-State and Transient DC Magnetic Flux Bias Suppression Methods for a Dual Active Bridge Converter

Study and design of main circuit parameters for ±800 kv/7500 MW DC power transmission project from Xiluodu to Zhexi

ELECTROMAGNETIC AND THERMAL CHARACTERISTICS SIMULATION FOR THREE-PHASE THREE-LIMB TRANSFORMERS UNDER DC MAGNETIC BIAS

Study and Design of Main Circuit Parameters for ±800 kV/7 500 MW DC Power Transmission Project From Xiluodu to Zhexi

Research Progress on Suppression Measures of Transformer DC Bias

Experimental Study On Dc Biasing Impact On Transformer'S Vibration And Sound

The Basic Law and Influencing Factor of DC Bias Distribution in AC Power Which is Near the Grounding Electrode of 800kv HVDC

Calculation and Analysis on Electromagnetic Coupling Component of AC/DC Transmission Lines on the Same Tower Built in Same Corridor

Analysis of Coupling Effect on LCC-MCC Hybrid HVDC from Parallel AC Lines in Close Proximity

An Analog-based, Duty Cycle Modulation Method to Remove the DC Bias in the Transformer for a Dual Active Bridge Converter

Study on the Influence of Conductor Arrangement on the Electromagnetic Environment of DC Transmission Line Constructed with AC Transmission Line in the Same Transmission Line Corridor

Analysis and Countermeasure Study on DC Bias of Main Transformer in a City