Abstract:Silicon oxynitrides (SiOxNy) have many advantageous properties for modern ceramic applications that justify a development of their new and efficient preparation methods. In the paper, we show the possibility of preparing amorphous SiOxNy-based materials from selected liquid organosilicon compounds, methyltrimethoxysilane CH3Si(OCH3)3 and methyltriethoxysilane CH3Si(OC2H5)3, by a convenient spray pyrolysis method. The precursor mist is transported with an inert gas or a mixture of reactive gases through a preheated tube reactor to undergo complex decomposition changes, and the resulting powders are collected in the exhaust filter. The powders are produced at the tube at temperatures of 1200, 1400, and 1600 °C under various gas atmosphere conditions. In the first option, argon Ar gas is used for mist transportation and ammonia NH3 gas serves as a reactive medium, while in the second option nitrogen N2 is exclusively applied. Powder X-Ray Diffraction (XRD) results confirm the highly amorphous nature of all products except those made at 1600 °C in nitrogen. SEM examination shows the spheroidal particle morphology of powders, which is typical for this method. Fourier Transform Infrared (FT-IR) spectroscopy reveals the presence of Si-N and Si-O bonds in the powders prepared under Ar/NH3, whereas those produced under N2 additionally contain Si-C bonds. Raman spectroscopy measurements also support some turbostratic free carbon C in the products prepared under nitrogen. The directly determined O- and N-contents provide additional data linking the process conditions with specific powder composition, especially from the point of view of oxygen replacement in the Si-O moieties formed upon initial precursor decomposition reactions by nitrogen (from NH3 or N2) or carbon (from the carbonization of the organic groups).

Preparation and Characterization of Silicon Oxycarbide

Preparation and Characterization of Porous SiC Ceramics by Oxidation Bonding Method

Preparation and Structural Evolution of SiOC Preceramic Aerogel During High-Temperature Treatment

Preparation of Nanoporous Silicon and Study on Its Properties

Preparation of Silicon Carbide Using Bamboo Charcoal As Carbon Source

Preparation of Amorphous SiOC Ceramic Powders through Precursor Polymer Pyrolysis

Chemical Structure and Microstructure Characterization of Ladder-Like Silsesquioxanes Derived Porous Silicon Oxycarbide Materials

Preparation and Characterization of SiO2/Carbon Foam and SIC/Carbon Foam Composites

Low-temperature formation of nanocrystalline β-SiC with high surface area and mesoporosity via reaction of mesoporous carbon and silicon powder

High Temperature Structure Evolution of Macroporous SiOC Ceramics Prepared by a Sol–gel Method

Amorphous Silicon Oxynitride-Based Powders Produced by Spray Pyrolysis from Liquid Organosilicon Compounds

Synthesis of cyano-polycarbosilane and investigation of its pyrolysis process

Thermal CVD synthesis and characterization of silicon nanopowders

Preparation and Characterization of Crox/Zro2 with High Thermal Stability and High Specific Surface Area

Preparation and Characterization of Core–shell Structured Co/SiO2 Nanosphere

Synthesis and characterization of submicron silicon carbide powders with silicon and phenolic resin

Fabrication and Characterization of Porous Mullite Coating on Porous Silicon Carbide Support

Preparation and Properties of Mullite-Bonded Porous Sic Ceramics Using Porous Alumina As Oxide

An Investigation of the Properties of Silicon Oxide Prepared by Oxidation of Silicon in Chlorine-Containing Ambients at 850°C

Preparation of Hierarchical Porous Silicon Carbide Monoliths via Ambient Pressure Drying Sol–Gel Process Followed by High-Temperature Pyrolysis