Abstract:Glass forming ability (GFA) of metallic glasses is a central topic for engineering applications and understanding glassy nature. Here, we report a series of Ti-based bulk metallic glasses (BMGs, (Ti41Zr25Be26Ni8)(100-x)Cu-x) with excellent GFA and mechanical properties. The (Ti41Zr25Be26Ni8)(93)Cu-7, glassy rod with 52 mm in diameter and 75 mm in length was successfully prepared by copper mould casting, and exhibits remarkable high yield strength, apparent plastic strain and high specific strength of 2182 MPa, 2.1% and 4.06 x 10(5) N.m/kg, respectively. Meanwhile, the (Ti41Zr25Be26Ni8)(93)Cu-7 BMG shows larger values of reduced glass transition temperature, gamma parameter and lower Gibbs free energy that indicates smaller driving force for crystallization, these results are in well agreement with its exceptional GFA. In addition, it has revealed that Poisson's ratios of the glassy alloys is strongly correlated with GFA. Furthermore, it shows that Ti-based metallic glasses with higher Poisson's ratios generally exhibit better GFA in the same glass forming system. The present results provide robust BMG-candidates for material science and engineering application where require large critical diameters. And the novel GFA-criterion based on the correlation between Poisson' ratio and GFA would provide guideline for developing new Ti-based BMGs.

New Ti-Based Bulk Glassy Alloys with High Glass-Forming Ability and Superior Mechanical Properties

Cu-based bulk glassy alloys with high tensile strength of over 2000 MPa

Cu-Based Bulk Glassy Alloys with Good Mechanical Properties in Cu-Zr-Hf-Ti System

High-strength Cu-based bulk glassy alloys in Cu–Zr–Ti and Cu–Hf–Ti ternary systems

A Ti-based bulk glassy alloy with high strength and good glass forming ability

Centimeter-sized Ti-based Bulk Metallic Glass with High Specific Strength

A New Centimeter‐Sized Ti‐Based Quaternary Bulk Metallic Glass with Good Mechanical Properties

PREPARATION AND PROPERTIES OF HIGH STRENGTH BULK METALLIC GLASS Ti_(53)Cu_(15)Ni_(18.5)Al_7M_3Si_3B_(0.5) (m=zr, Hf, Sc)

Glass Formation and Mechanical Properties of Ti–Cu–Ni Alloys with High Ti Content

Formation and Thermal Properties of Ti-Based Bulk Amorphous Alloy

Glass Forming Ability and Mechanical Properties of New Ni-Based Bulk Metallic Glasses

Fabrication Of Bulk Glassy Hf50cu30ni10al10 Alloy By Copper Mold Casting

The Novel Ti-based Metallic Glass with Excellent Glass Forming Ability and an Elastic Constant Dependent Glass Forming Criterion

A Ti–Zr–Be–Fe–Cu Bulk Metallic Glass with Superior Glass-Forming Ability and High Specific Strength

A New Ti–Zr–Hf–Cu–Ni–Si–Sn Bulk Amorphous Alloy with High Glass-Forming Ability

A new Mg65Cu7.5Ni7.5Zn5Ag 5Y10 bulk metallic glass with strong glass-forming ability

Glass forming ability, thermodynamics and mechanical properties of novel Ti–Cu–Ni–Zr–Hf bulk metallic glasses

Crystallization and mechanical behavior of (Hf, Zr)–Ti–Cu–Ni–Al metallic glasses

Preparation of (ti0.45cu0.378zr0.10ni0.072)100−xsnx Bulk Metallic Glasses

Formation and Compressive Properties of A Ni-Ti-Zr-Al-Cu-Si Amorphous Alloy

Formation, Thermal Stability and Mechanical Properties of Ti42.5Zr7.5Cu40Ni5Sn5 Bulk Metallic Glass