Abstract:Glass forming ability (GFA) of metallic glasses is a central topic for engineering applications and understanding glassy nature. Here, we report a series of Ti-based bulk metallic glasses (BMGs, (Ti41Zr25Be26Ni8)(100-x)Cu-x) with excellent GFA and mechanical properties. The (Ti41Zr25Be26Ni8)(93)Cu-7, glassy rod with 52 mm in diameter and 75 mm in length was successfully prepared by copper mould casting, and exhibits remarkable high yield strength, apparent plastic strain and high specific strength of 2182 MPa, 2.1% and 4.06 x 10(5) N.m/kg, respectively. Meanwhile, the (Ti41Zr25Be26Ni8)(93)Cu-7 BMG shows larger values of reduced glass transition temperature, gamma parameter and lower Gibbs free energy that indicates smaller driving force for crystallization, these results are in well agreement with its exceptional GFA. In addition, it has revealed that Poisson's ratios of the glassy alloys is strongly correlated with GFA. Furthermore, it shows that Ti-based metallic glasses with higher Poisson's ratios generally exhibit better GFA in the same glass forming system. The present results provide robust BMG-candidates for material science and engineering application where require large critical diameters. And the novel GFA-criterion based on the correlation between Poisson' ratio and GFA would provide guideline for developing new Ti-based BMGs.

A New Centimeter‐Sized Ti‐Based Quaternary Bulk Metallic Glass with Good Mechanical Properties

Centimeter-sized Ti-based Bulk Metallic Glass with High Specific Strength

CENTIMETER-SIZED Ti-BASED QUATERNARY BULK METALLIC GLASS PREPARED BY WATER QUENCHING

A Centimeter-Sized Quaternary Ti-Zr-Be-Ag Bulk Metallic Glass

Centimeter‐Sized Quaternary Ti‐Based Bulk Metallic Glasses with High Ti Content of 50 At%

A Ti–Zr–Be–Fe–Cu Bulk Metallic Glass with Superior Glass-Forming Ability and High Specific Strength

A New Centimeter-Diameter Cu-Based Bulk Metallic Glass

New Centimeter-Sized Quaternary Ti–Zr–Be–Cu Bulk Metallic Glasses with Large Glass Forming Ability

Cu-Based Bulk Glassy Alloys with Good Mechanical Properties in Cu-Zr-Hf-Ti System

PREPARATION AND PROPERTIES OF HIGH STRENGTH BULK METALLIC GLASS Ti_(53)Cu_(15)Ni_(18.5)Al_7M_3Si_3B_(0.5) (m=zr, Hf, Sc)

A Ti-based bulk glassy alloy with high strength and good glass forming ability

Formation, Thermal Stability and Mechanical Properties of Ti42.5Zr7.5Cu40Ni5Sn5 Bulk Metallic Glass

Cu-based bulk glassy alloys with high tensile strength of over 2000 MPa

Glass-forming Ability and Thermal Stability of a New Bulk Metallic Glass in the Quaternary Zr–Cu–Ni–Al System

Quaternary Ti–Zr–Be–Ni Bulk Metallic Glasses with Large Glass-Forming Ability

High-strength Cu-based bulk glassy alloys in Cu–Zr–Ti and Cu–Hf–Ti ternary systems

Glass forming ability, thermodynamics and mechanical properties of novel Ti–Cu–Ni–Zr–Hf bulk metallic glasses

Centimeter-sized Ti-rich Bulk Metallic Glasses with Superior Specific Strength and Corrosion Resistance

The Novel Ti-based Metallic Glass with Excellent Glass Forming Ability and an Elastic Constant Dependent Glass Forming Criterion

A New Cu–Hf–Al Ternary Bulk Metallic Glass with High Glass Forming Ability and Ductility

Lightweight Ti–Zr–Be–Al Bulk Metallic Glasses with Improved Glass-Forming Ability and Compressive Plasticity