Abstract:Glass forming ability (GFA) of metallic glasses is a central topic for engineering applications and understanding glassy nature. Here, we report a series of Ti-based bulk metallic glasses (BMGs, (Ti41Zr25Be26Ni8)(100-x)Cu-x) with excellent GFA and mechanical properties. The (Ti41Zr25Be26Ni8)(93)Cu-7, glassy rod with 52 mm in diameter and 75 mm in length was successfully prepared by copper mould casting, and exhibits remarkable high yield strength, apparent plastic strain and high specific strength of 2182 MPa, 2.1% and 4.06 x 10(5) N.m/kg, respectively. Meanwhile, the (Ti41Zr25Be26Ni8)(93)Cu-7 BMG shows larger values of reduced glass transition temperature, gamma parameter and lower Gibbs free energy that indicates smaller driving force for crystallization, these results are in well agreement with its exceptional GFA. In addition, it has revealed that Poisson's ratios of the glassy alloys is strongly correlated with GFA. Furthermore, it shows that Ti-based metallic glasses with higher Poisson's ratios generally exhibit better GFA in the same glass forming system. The present results provide robust BMG-candidates for material science and engineering application where require large critical diameters. And the novel GFA-criterion based on the correlation between Poisson' ratio and GFA would provide guideline for developing new Ti-based BMGs.

Lightweight Ti-based Bulk Metallic Glasses with Superior Thermoplastic Formability

Research on Thermoplastic Formability and Nanomoulding Mechanism of Lightweight Ti-based Bulk Metallic Glasses

Lightweight Ti–Zr–Be–Al Bulk Metallic Glasses with Improved Glass-Forming Ability and Compressive Plasticity

Centimeter-sized Ti-rich Bulk Metallic Glasses with Superior Specific Strength and Corrosion Resistance

The Novel Ti-based Metallic Glass with Excellent Glass Forming Ability and an Elastic Constant Dependent Glass Forming Criterion

Quaternary Ti–Zr–Be–Ni Bulk Metallic Glasses with Large Glass-Forming Ability

A Ti–Zr–Be–Fe–Cu Bulk Metallic Glass with Superior Glass-Forming Ability and High Specific Strength

Centimeter‐Sized Quaternary Ti‐Based Bulk Metallic Glasses with High Ti Content of 50 At%

Effect of Chemical Composition on the Thermoplastic Formability and Nanoindentation of Ti-Based Bulk Metallic Glasses

A New Centimeter‐Sized Ti‐Based Quaternary Bulk Metallic Glass with Good Mechanical Properties

New Class of Plastic Bulk Metallic Glass.

Nontoxic, precious-metal-free titanium-based metallic glasses with exceptional glass-forming ability and high specific strength

Glass forming ability, thermodynamics and mechanical properties of novel Ti–Cu–Ni–Zr–Hf bulk metallic glasses

A Ti-based bulk glassy alloy with high strength and good glass forming ability

Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing

Effect of Ti addition on mechanical properties of Zr-based bulk metallic glasses

Enhancing strength and plasticity of Zr-based bulk metallic glasses by Zr partially substituted Fe and isothermal annealing

A Centimeter-Sized Quaternary Ti-Zr-Be-Ag Bulk Metallic Glass

Zr–Ti–Al–Fe–Cu bulk metallic glasses for biomedical device application

Achieving ultrahigh-specific strength and enhanced GFA in Ti-based bulk metallic glasses via a two-step alloying strategy

Formation and properties of biocompatible Ti-based bulk metallic glasses in the Ti–Cu–Zr–Fe–Sn–Si–Ag system