Abstract:Bulk glassy Cu–Zr–Ti base alloys containing a small amount of Nb or Ta were found to exhibit high strength combined with significant plastic elongation. The glass transition temperature (Tg), crystallization temperature (Tx) and ΔTx(=Tx−Tg) of the Cu-based bulk glassy alloys are in the range of 719 to 731 K, 765 to 769 K and 46 to 44 K, respectively, for the Nb-containing alloy and 716 to 741 K, 752 to 780 K and 44 to 34 K, respectively, for the Ta-containing alloy. With increasing Nb or Ta content to 3 at% for the (Cu0.6Zr0.3Ti0.1)100−xMx alloys, the Young’s modulus, yield strength and compressive fracture strength increase from 114 to 121 GPa, 1785 to 2010 MPa and 2150 to 2250 MPa, respectively, and the plastic elongation shows a maximum of 1.8% at 1%Nb and 3.4% at 1%Ta. The 1%Ta alloy exhibited good combination of high fracture strength of 2250 MPa and large total elongation of 5.4%. The effectiveness of additional Nb or Ta on the increase in elongation and fracture strength is presumably due to the mixed state of atomic pairs with attractive and repulsive bonding natures among the constituent elements with significantly different atomic size mismatches. The success of forming the bulk glassy alloys with high strength and significant elongation is encouraging for future applications as high-strength type materials.

Cu-Based Bulk Glassy Alloys with Good Mechanical Properties in Cu-Zr-Hf-Ti System

High-strength Cu-based bulk glassy alloys in Cu–Zr–Ti and Cu–Hf–Ti ternary systems

Cu-based bulk glassy alloys with high tensile strength of over 2000 MPa

A Ti-based bulk glassy alloy with high strength and good glass forming ability

Centimeter-sized Ti-based Bulk Metallic Glass with High Specific Strength

Composition design and mechanical properties of ternary Cu–Zr–Ti bulk metallic glasses

A Ti–Zr–Be–Fe–Cu Bulk Metallic Glass with Superior Glass-Forming Ability and High Specific Strength

A New Centimeter‐Sized Ti‐Based Quaternary Bulk Metallic Glass with Good Mechanical Properties

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability

Thermal Stability and Mechanical Properties of Bulk Glassy Cu-Zr-Ti-(Nb, Ta) Alloys

Glass forming ability, thermodynamics and mechanical properties of novel Ti–Cu–Ni–Zr–Hf bulk metallic glasses

Crystallization and mechanical behavior of (Hf, Zr)–Ti–Cu–Ni–Al metallic glasses

Formation and mechanical properties of Cu_(58)Zr_(20)Ti_(20)Mo_2 bulk metallic glass

Bulk metallic glass formation in the (Ti,Zr)-(Ni,Cu)-S system

Structure and properties of Zr–Ta–Cu–Ni–Al bulk metallic glasses and metallic glass matrix composites

Failure behavior of Cu–Ti–Zr-based bulk metallic glass alloys

Preparation of (ti0.45cu0.378zr0.10ni0.072)100−xsnx Bulk Metallic Glasses

Formation, Structure, and Crystallization Behavior of Cu-Based Bulk Glass-Forming Alloys

New Centimeter-Sized Quaternary Ti–Zr–Be–Cu Bulk Metallic Glasses with Large Glass Forming Ability

Formation, Thermal Stability and Mechanical Properties of Zr-Nb-Cu-Ni-Al Bulk Metallic Glasses

Effect of Ti addition on mechanical properties of Zr-based bulk metallic glasses