Abstract:In this work, we provide a holistic picture about the relationship between atomic structure, mechanical properties, and thermal stability of ZrCuAlx thin film metallic glasses (TFMGs) varying the Al content from 0 to 12 at.%, carrying out a broad characterization involving experiments and ab initio molecular dynamic simulations (AIMD). We show that the addition of Al resulted in a change of average interatomic distances by ∼10 pm with the formation of shorter bonds (Al-Zr and Al-Cu), influencing the mechanical response (shear/elastic moduli and hardness) which increases by ∼15% for 12 at.% Al. Moreover, tensile tests on polymer substrate revealed a maximum value for the crack initiation strain of 2.1% for ZrCuAl9, while the strain-to-failure rapidly decreases at higher Al contents. The observed reduction in damage tolerance is correlated to a transition in atomic configuration. Specifically, a maximum in density of full and defective icosahedral cluster population is observed at 9 at.% Al, inducing a more shear-resistant behavior to the material. Thermal stability is investigated by high-energy and conventional x-ray diffraction and electrical resistivity measurements as a function of the temperature. Glass transition (Tg ) and crystallization (Tx ) temperature increase by Al addition reaching 450 and 500 °C, respectively for ZrCuAl12. The increase in thermal stability is related to the reduction in atomic mobility due to the formation of shorter chemical bonds, inhibiting atomic reconfiguration during crystallization. In conclusion, we provide guidelines to the design of compositional-tailored ZrCuAlx TFMGs with tuned mechanical properties and thermal stability with potential impact on industrial applications.

Crystallization and mechanical behavior of (Hf, Zr)–Ti–Cu–Ni–Al metallic glasses

On the atomic structure of Zr–Ni and Zr–Ni–Al metallic glasses

Structure and properties of Zr–Ta–Cu–Ni–Al bulk metallic glasses and metallic glass matrix composites

High-strength Cu-based bulk glassy alloys in Cu–Zr–Ti and Cu–Hf–Ti ternary systems

Cu-Based Bulk Glassy Alloys with Good Mechanical Properties in Cu-Zr-Hf-Ti System

Metallic glass formation in Cu–Ni–Ti (Zr, Hf) systems studied by thermodynamic calculations

The characterisation of atomic structure and glass-forming ability of the Zr–Cu–Co metallic glasses studied by molecular dynamics simulations

Mechanical properties and thermal stability of ZrCuAlx thin film metallic glasses: Experiments and first-principle calculations

Glass forming ability, thermodynamics and mechanical properties of novel Ti–Cu–Ni–Zr–Hf bulk metallic glasses

Formation, Thermal Stability and Mechanical Properties of Zr-Nb-Cu-Ni-Al Bulk Metallic Glasses

Cu-based bulk glassy alloys with high tensile strength of over 2000 MPa

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability

Influence of Substitution of Cu by Ni on the Crystallization Kinetics of TiZrHfBeCu High Entropy Bulk Metallic Glass

Effect of Hf substitution Cu on glass-forming ability, mechanical properties and corrosion resistance of Ni-free Zr–Ti–Cu–Al bulk metallic glasses

Glass-Forming Ability, Mechanical Properties, and Energetic Characteristics of ZrCuNiAlNbHfY Bulk Metallic Glasses

Glass-formation and atomic structures of Cux(Zr 0.22Hf0.78)1-x and (Cu0.61Hf 0.39)1-xZrx alloys investigated by Monte Carlo simulation

Fabrication and Soft Magnetic Properties of Fe–B–Si–Zr/Hf–Cu Nanocrystalline Alloys with High Glass-Forming Ability

Enhanced superconductivity in Hf-base metallic glasses

The effect of minor alloying on the glass forming ability and crystallization reaction of Ti32.8Zr30.2Cu9M5.3Be22.7 (M=Fe, Co, and Ni) bulk metallic glass

Glassy and Icosahedral Phases in Rapidly Solidified Ti–Zr–Hf–(Fe, Co or Ni) Alloys

Development and Crystallization Kinetics of Novel Near-Equiatomic High-Entropy Bulk Metallic Glasses