Abstract:It has been found that the partial substitution of Fe, Al, Ag, Cu, Ni, V, or Cr for Be effectively enhances the glass-forming ability of Ti–Zr–Be ternary alloy. The influence of different alloying elements on crystallization kinetics of Ti 41 Zr 25 Be 34 alloy has been investigated by isothermal and isochronal differential calorimetry combined with X-ray diffraction. Among the selected alloying elements, Fe, Al, Cu, Ni, or Cr can enhance the thermal stability, while the Ag- and V-containing alloys exhibit a slightly narrower supercool liquid region. The crystallization of all the eight alloys proceeds through at least two exothermic events. The apparent activation energies of glass transition and crystallization have been determined based on the Kissinger equation. The substitution of Al, Ag, Cu, or Ni for Be does not change the product of the primary crystallization of the base alloy. However, with the addition of beta stabilized elements (Fe, V, and Cr), the formation of β-Ti as primary phase is promoted. The overall nucleation and growth characteristics of the parent, Al-, Ag-, Cu-, Ni-, V-, and Cr-additive alloys, are similar. Compared with the other seven alloys, Ti 41 Zr 25 Be 28 Fe 6 alloy exhibits much larger Avrami exponents with an average value of 5.26, indicating a high-dimensional growth with increasing nucleation rate.

Glassy and Icosahedral Phases in Rapidly Solidified Ti–Zr–Hf–(Fe, Co or Ni) Alloys

Formation of Amorphous and Icosahedral Phases in Ti–Zr–Hf–LTM (ltm=ni, Pd or Pt) Alloys

Phase Transformations in the Rapidly Solidified Ti40zr20hf20pd20 Alloy

Crystallization and mechanical behavior of (Hf, Zr)–Ti–Cu–Ni–Al metallic glasses

Structural Properties and Thermal Stability of Glassy (Zr<sub>.65</sub>Al<sub>.075</sub>Cu<sub>.175</sub>Ni<sub>.1</sub>)<sub>100-x</sub>Fe<sub>x</sub> (x≤20) Alloys Prepared by Mechanical Alloying

Structural Properties and Thermal Stability of Glassy (Zr.65al.075cu.175ni.1)100-Xfex (x≤20) Alloys Prepared by Mechanical Alloying

Bulk metallic glass formation in the (Ti,Zr)-(Ni,Cu)-S system

The Crystal Structure, Microhardness and Thermal Stability of the Ti26Al55Zn19 Alloy

Non-isothermal crystallization kinetics and glass-forming ability of Ti 41 Zr 25 Be 28 Fe 6 bulk metallic glass investigated by differential scanning calorimetry

Effects of Alloying Elements on Crystallization Kinetics of Ti–Zr–Be Bulk Metallic Glass

Non-isothermal crystallization kinetics and glass-forming ability of Ti41Zr25Be28Fe6 bulk metallic glass investigated by differential scanning calorimetry

Crystallization Path and Non-Isothermal Kinetics of the Zr59.5Cu14.4Ni11.6Al9.7Nb4.8 Metallic Glass under Different Heating Rates

Is There Phases Separation in Cu<sub>60</sub>Ti<sub>20</sub>Zr<sub>20</sub> Alloy?

Structure and Magnetic Behaviours of Melt-Spun Ti1.4v0.6ni Alloy Containing Icosahedral Quasicrystalline Phase

Cu-alloying Effect on Crystallization Kinetics of Ti41Zr25Be28Fe6 Bulk Metallic Glass

Cu-Based Bulk Glassy Alloys with Good Mechanical Properties in Cu-Zr-Hf-Ti System

Influence of Substitution of Cu by Ni on the Crystallization Kinetics of TiZrHfBeCu High Entropy Bulk Metallic Glass

Phase Evolution and Glass Formation in an Fe-Based Alloy

Structure and properties of Zr–Ta–Cu–Ni–Al bulk metallic glasses and metallic glass matrix composites

Mechanism and kinetics of nano-crystallization of the thermally stable NiNb(ZrTi)Al metallic glasses

MICROSTRUCTURE AND PHASE TRANSFORMATION DURING ANNEALING OF RAPIDLY SOLIDIFIED Al-Fe-Ti-C ALLOY