Abstract:SiC-4 vol% BN composites were hot-pressed at 2050°C for 4 h at 40 MPa in a N2 atmosphere using micron-sized β-SiC and h-BN starting powders with 1 vol% sintering additives. Four batches were prepared using four different types of additive systems, i.e. Y2O3-Sc2O3, Yb2O3-CaO, Yb2O3-MgO, and Al2O3-AlN-Y2O3. The electrical, thermal, and mechanical properties of the SiC-4 vol% BN composites, which are primarily limited by the intrinsic weakness of h-BN and by the point defects (BC and AlSi) created by the dissolution of B and Al in the SiC lattice, were successfully tuned with the use of different additive systems. The electrical conductivity of SiC-4 vol% BN composites improved ~fivefold, i.e. from 2.6 (Ω·cm)−1 for the Al2O3-AlN-Y2O3-containing specimen to 13.9 (Ω·cm)−1 for the Y2O3-Sc2O3-containing specimen, owing to grain-growth-assisted N-doping and the elimination of Al-derived acceptors. Thermal conductivity was altered by 16% with the use of different additive systems. Fracture toughness dramatically increased from 4.3 MPa∙m1/2 in Yb2O3-CaO-containing specimens to 7.3 MPa∙m1/2 in Y2O3-Sc2O3-containing specimens. The electrical conductivity, thermal conductivity, flexural strength, and fracture toughness of SiC-4 vol% BN composite sintered with 1 vol% Y2O3-Sc2O3 were 13.9 (Ω·cm)−1, 82.0 W·m−1 K−1, 505 MPa, and 7.3 MPa∙m1/2, respectively.

Fabrication and Properties of Pressureless Sintered Si<sub>3</sub>N<sub>4</sub>/BN Composite Ceramics with La<sub>2</sub>O<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub>-Y<sub>2</sub>O<sub>3</sub> as Sintering Additives

Fabrication and Properties of Pressureless Sintered Si<sub>3</sub>N<sub>4</sub>/BN Composite Ceramics with La<sub>2</sub>O<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub>-Y<sub>2</sub>O<sub>3</sub> as Sintering Additives

Fabrication and Properties of Pressureless Sintered Si3N4/BN Composite Ceramics with La2O3-Al2O3-Y2O3 as Sintering Additives

Fabrication and properties of Si3N4/BN composite ceramics by pressureless sintering with Yb2O3-Al 2O3-Y2O3 as sintering additives

Si<sub>3</sub>N<sub>4</sub>/BN Composite Ceramics with Nd<sub>2</sub>O<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub>-Y<sub>2</sub>O<sub>3</sub> Ternary Additives by Pressureless Sintering

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Fabrication and Properties of SiO2-BN-Si3N4 Composites

Microstructure and room/elevated-temperature mechanical properties of hot-pressed h-BN composite ceramics with La2O3-Al2O3-SiO2 addition

Microstructure of hot-pressed h-BN/Si3N4 ceramic composites with Y2O3–Al2O3 sintering additive

Fabrication of High Strength α-SiAlON/BN Composition Ceramics by Hot Pressing

Effect of Hexagonal BN on the Microstructure and Mechanical Properties of Pressureless Sintered Porous Si3N4 Ceramics

Effects of Sintering Additive and Β-Si3n4 Phase Contents on the Properties of Porous Si3N4 Ceramics

Preparation and properties of sintering additive-free AlN–BN composite ceramics by hot-pressing sintering

Effect of CaF2 on Microstructure and Mechanical Properties of Pressureless Sintered Si3N4/BN Composites

Effect of additions on the properties of Al2O3/BN machinable ceramics

Effect of Sintering Additive Content on Mechanical and Dielectric Properties of Porous Si3N4/BN Composite Ceramics

Pressureless Sintering and Properties Investigation of Silicon Nitride

Mechanical and wear properties of h-BN/Si3N4 ceramic composites

Effects of additives to Si3N4 matrix on microstructure and properties of laminated Si3N4/BN ceramics

Tuning the electrical, thermal, and mechanical properties of SiC-BN composites using sintering additives