Abstract:Due to their narrow band gap and compatibility with silicon processing, germanium-tin (Ge$_{1-x}$Sn$_x$) alloys are a versatile platform for scalable integrated mid-infrared photonics. These semiconductors are typically grown on silicon wafers using Ge as an interlayer. However, the large lattice mismatch in this heteroepitaxy protocol leads to the build-up of compressive strain in the grown layers. This compressive strain limits the material quality and its thermal stability besides expanding the band gap, thereby increasing the Sn content needed to cover a broader range in the mid-infrared. Released Ge$_{1-x}$Sn$_x$ membranes provide an effective way to mitigate these harmful effects of the epitaxial strain and control the band gap energy while enabling the hybrid integration onto different substrates. With this perspective, herein strain-relaxed Ge$_{0.89}$Sn$_{0.11}$ membranes are fabricated and subsequently transfer-printed with metal contacts to create multiple photodetectors in a single transfer step. The resulting photodetectors exhibit an extended photodetection cutoff reaching a wavelength of $3.1 \,\mu$m, coupled with a significant reduction in the dark current of two orders of magnitude as compared to as-grown photoconductive devices. The latter yields a reduced cutoff of $2.8 \,\mu$m due to the inherent compressive strain. Furthermore, the impact of chemical treatment and annealing on the device performance was also investigated showing a further reduction in the dark current. The demonstrated transfer printing, along with the use of an adhesive layer, would allow the transfer of multiple GeSn membranes onto virtually any substrate. This approach paves the way for scalable fabrication of hybrid optoelectronic devices leveraging the tunable band gap of Ge$_{1-x}$Sn$_x$ in the mid-wave infrared range.

Impact of Local Strain From Selective Epitaxial Germanium With Thin Si/SiGe Buffer on High-Performance p-i-n Photodetectors With a Low Thermal Budget

Grating and Hole-Array Enhanced Germanium Lateral P-I-n Photodetectors on an Insulator Platform

Uniformly Tensile-Strained Germanium Enabled by a Recessed Nitride Stressor for Efficient Integrated Photodetectors at Longer Wavelengths

Selective Epitaxy of Germanium on silicon for the fabrication of CMOS compatible short-wavelength infrared photodetectors

Germanium Photodetector with Enhanced Photo-response at the L-band and Beyond for Integrated Photonic Applications

Strain-Induced Enhancement of Electroluminescence from Highly Strained Germanium Light-Emitting Diodes

High-efficiency Normal-Incidence Vertical P-I-n Photodetectors on a Germanium-on-insulator Platform

Strained germanium thin film membrane on silicon substrate for optoelectronics

Suspended germanium membranes photodetector with tunable biaxial tensile strain and location-determined wavelength-selective photoresponsivity

Direct-Bandgap Electroluminescence from Germanium with Subband Engineering Utilizing a Metal-Oxide-Semiconductor Structure

Integration of Tensile-Strained Ge P-I-n Photodetector on Advanced CMOS Platform

Vertical field enhanced nanostructure for quantum well infrared photodetector through Germanium subwavelength arrays

Laser-Crystallized Epitaxial Germanium on Silicon-Based Near-Infrared Photodetector

Normal-incidence SiGe/Si photodetectors with different buffer layers

High Performance p-i-n Photodetectors on Ge-on-Insulator Platform

High detectivity Ge photodetector at 940?nm achieved by growing strained-Ge with a top Si stressor

Germanium Quantum Dot Infrared Photodetectors Addressed by Self-Aligned Silicon Nanowire Electrodes.

A SiGe/Si Nanostructure with Graphene Absorbent for Long Wavelength Infrared Detection

Low dark current lateral Ge PIN photodetector array with resonant cavity effect for short wave infrared imaging

Transfer-printed multiple Ge$_{0.89}$Sn$_{0.11}$ membrane mid-infrared photodetectors

Mid-infrared Imaging Using Strain-Relaxed Ge 1- x Sn x Alloys Grown on 20 nm Ge Nanowires