Abstract:To enhance high-temperature wear resistance and cutting performances of cermet tools, nano-Al2O3 particles were added into four kinds of Ti(C,N)-based cermets. The microstructure, mechanical properties, wear resistance, and cutting performances were studied. The nano-Al2O3 was supposed to distribute in the binder phase, leading to the change of lattice constants and dispersion strengthening. Due to the distribution of nanoparticles at the grain boundaries, the movement of the grain boundaries was hindered, and the mean grain size decreased from 1.03 μm to 0.89 μm. The hardness and fracture toughness showed the change tendency of rising the peak and then falling with nano-Al2O3 addition. The cermet with 2 wt% nano-Al2O3 displayed the topmost hardness of 1654.4 HV30 and fracture toughness of 9.1 MPa·m1/2, due to the dispersion strengthening and pinning effect of nano particles. During the sliding wear tests at 700 °C, the wear rates of cermet containing 2 wt% nano-Al2O3 decreased by 63% compared to cermet without nano-Al2O3. The superior high-temperature wear resistance was ascribed to the thermal softening resistance of nano-Al2O3, the strengthening and toughening effect of nano-Al2O3 on matrix and the dense tribo-chemical layers. The abrasive wear of cermet with no nano-Al2O3 addition was more significant, while the wear behavior changed to the removal of tribo-chemical layers when nano-Al2O3 was 2 wt%. The tool life of cermet with 2 wt% nano-Al2O3 was increased by 50% in comparison with cermet without nano-Al2O3 during machining 45 steel.

Experimental Research on the Composite Material of Nano-Al2O3/Cemented Carbide

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Enhanced the Mechanical Properties and Corrosion Resistance of Ultra-Coarse Grain WC-8Co Cemented Carbides by the Introduction of Cu and Ni

Effects of Nano-Al2o3 and Nano-Zro2 on the Microstructure, Behavior and Abrasive Wear Resistance of WC-8Co Cemented Carbide

Effects of nano-alumina on mechanical properties and wear resistance of WC-8Co cemented carbide by spark plasma sintering

Cutting Performance of Wc-Co Alloys Modified by Nano-Additives

Research Progress in Cemented Carbide with Co-Ni-Al Composite Binder Phase

Effect of titanium addition on microstructure and mechanical properties of WC-Ni<sub>3</sub>Al cemented carbide br

Microstructures and Properties of WC-10 wt.%CoCrFeNiAlx Composite Cemented Carbides

Effects of Ni and Cu Additions on Microstructures, Mechanical Properties and Wear Resistances of Ultra-Coarse Grained WC–6Co Cemented Carbides

Effects of Cr2(C,N) Addition on Microstructure and Comprehensive Mechanical Properties of Ultrafine Cemented Carbide

Effect of Vc and Nbc Additions on Microstructure and Properties of Ultrafine Wc-10co Cemented Carbides

Effect of Cr3C2 Addition on Microstructure and Mechanical Properties of WC-CoNiFe Cemented Carbides

Study on Effect of High-Entropy Alloy Binder on Microstructure and Properties of WC Cemented Carbide Doped with Rare Earth Oxide

Mechanical Properties and Microstructure of Al_2O_3/WC - 8co Nanometer/micron Composites

Effect of WC Nanoparticles on the Microstructure and Properties of WC-Bronze-Ni-Mn Based Diamond Composites

Research on Microstructure and Properties of Ultrafine Grained WC-Ni3Al Cemented Carbide

Effects of nano-Al2O3 addition on microstructure, mechanical properties, and wear resistance of Ti(C, N)-based cermets

Effect of Cobalt Content on the Microstructure and Mechanical Properties of Coarse Grained WC-Co Cemented Carbides Fabricated from Chemically Coated Composite Powder

Study on Microstructure and Mechanical Properties of WC-10Ni 3 Al Cemented Carbide Prepared by Different Ball-Milling Suspension.

Effects of Nano Wc and Cr3c2 on Grain Growth, Microstructure and Mechanical Properties of Ultra-Coarse Cemented Carbides