Abstract:Three sets of coarse grained WC–8Co cemented carbides were fabricated by unmilled composite powders using three different-sized raw WC powders. Effects of WC particle sizes on shrinkage behavior and microstructure evolution of coarse grained WC–8Co cemented carbides during a sintering process were investigated by dilatometer and a scanning electron microscope. Furthermore, the mechanical properties and their wear properties were evaluated for the forthcoming potential applications. It was found that during the sintering process the densification and grain growth of the WC–8Co cemented carbides with finer carbide particles as raw materials started earlier than coarser powders regardless of the effects of lattice distortion. With increasing initial WC particle size from 2.01μm to 4.37μm, mean WC grain size of coarse grained WC–8Co cemented carbides rose from 3.19μm to 6.03μm, the Co mean free path rose from 0.67μm to 1.24μm. At the same time, with the increasing grain size, the transgranular fracture though the carbide phase and binder phase increased, while intergranular fracture decreased, correlating to that the transverse rupture strength and fracture toughness increased from 2264MPa, 19.13MPam1/2 to 2769MPa and 25.24MPam1/2, respectively. The dominant wear mechanism in sliding wear test for the WC–8Co cemented carbides transferred from extraction of small WC grains to cracking and fragmentation of the large carbide grains with the increasing grain size.

Microstructure and mechanical properties of WC–Co-based cemented carbide with bimodal WC grain size distribution

Effect of coarse grained WC addition on microstructure and mechanical properties of WC-Co cemented carbide

Effects of WC Particle Size on Sintering Behavior and Mechanical Properties of Coarse Grained WC–8Co Cemented Carbides Fabricated by Unmilled Composite Powders

Comparative Study on Microstructure and Mechanical Properties of Coarse-grained WC-based Cemented Carbides Sintered with Ultrafine WC or (W+C) as Additives

The Enhancement of the Microstructure and Mechanical Performances of Ultrafine WC-Co Cemented Carbides by Optimizing Cr2(C,N) Addition and WC Particle Sizes

Effect of Carbon Content on Microstructure and Mechanical Properties of WC-10Co Cemented Carbides with Plate-Like WC Grain

Effect of particle size and high-energy ball milling time on microstructure and mechanical properties of WC-10Co cemented carbides with plate-like WC grains

Effect of WC grain size on mechanical properties and microstructures of cemented carbide with medium entropy alloy Co-Ni-Fe binder

The effects of micron WC contents on the microstructure and mechanical properties of ultrafine WC-(micron WC-Co) cemented carbides

Grain Growth Behaviour and Mechanical Properties of Coarse-Grained Cemented Carbides with Bimodal Grain Size Distributions

On the Enhanced Wear Resistance of Ultra-Coarse WC-Co Cemented Carbides by WCoB Addition

Effect of Cobalt Content on the Microstructure and Mechanical Properties of Coarse Grained WC-Co Cemented Carbides Fabricated from Chemically Coated Composite Powder

Effect of Carbon Content on the Microstructure and Mechanical Properties of Ultrafine WC-15Co Cemented Carbides Using a Co-based Solid Solution Binder Phase

Microstructure and properties of ultrafine WC–Co–VC cemented carbides with different Co contents

Performance Enhancement of Ultra-Coarse Cemented Carbide by Boride Additives

The effects of fine WC contents and temperature on the microstructure and mechanical properties of inhomogeneous WC-(fine WC-Co) cemented carbides

Effects of ultrafine WC on the densification behavior and microstructural evolution of coarse-grained WC-5Co cemented carbides

Microstructure and wear resistance of bimodal cemented carbide coating prepared by direct laser powder deposition

Influence of VC/Cr3C2 and Mixed Carbon Content on Microstructure and Properties of Ultrafine WC-0.5Co Cemented Carbide

Effect of Vc and Nbc Additions on Microstructure and Properties of Ultrafine Wc-10co Cemented Carbides

Effect ofη phase powders addition on the microstructure and properties of WC-10Co cemented carbides