Abstract:TiN/Ta multilayer film with a modulation period of 5.6 nm and modulation ratio of 1 : 1 was produced by ion beam assisted deposition. Microstructure of the as-deposited TiN/Ta multilayer film was observed by transmission electron microscopy and mechanical properties were investigated. Residual stress in the TiN/Ta multilayer film was about 72% of that of a TiN monolayer film with equivalent thickness deposited under the same conditions. Partial residual stress was released in the Ta sublayers during deposition, which led to the decrease of the residual stress of the TiN/Ta multilayer film. Nanohardness ( H ) of the TiN/Ta multilayer film was 24 GPa, 14% higher than that of the TiN monolayer film. It is suggested that the increase of the nanohardness is due to the introduction of the Ta layers which restrained the growth of TiN crystal and led to the decrease of the grain size. A significant increase (3.5 times) of theH3/E2( E elastic modulus) value indicated that the TiN/Ta multilayer film has higher elasticity than the TiN monolayer film. TheLc(critical load in nano-scratch test) value of the TiN monolayer film was 45 mN, which was far lower than that of the TiN/Ta multilayer film (around 75 mN). Results of the indentation test showed a higher fracture toughness of the TiN/Ta multilayer film than that of the TiN monolayer film. Results of differential scanning calorimetric (DSC) and thermo gravimetric analysis (TGA) indicate that the TiN/Ta multilayer film has better thermal stability than the TiN monolayer film.

Thermal stability and microstructure of graded α-Ta(N)/TaN bi-layer diffusion barrier

Interface Stability and Microstructure of an Ultrathin Α-Ta/graded Ta(N)/TaN Multilayer Diffusion Barrier

The Microstructure of Al2O3/TiO2-NiCrBSi Graded Thermal Barrier Coatings Produced by Flame Spraying

Preparation and Properties Characterization of Gradient Alpha-Ta(N)/Tan Bi-Layer Diffusion Barrier

Design and Fabrication of Ultrathin and Highly Thermal-Stable Α-Ta/graded Ta(N)/TaN Multilayer As Diffusion Barrier for Cu Interconnects

Growth of nanoscale Ta-Al-N diffusion barriers

Effect of annealing ambient and diffusion barrier on thermal stability of multilayer

Thermal stability of Ta-Si-N/Zr barrier in Cu metallization

Effect of Thickness Scaling on the Permeability and Thermal Stability of Ta(N) Diffusion Barrier

Superior Thermal Stability of Ta/Tan Bi-Layer Structure for Copper Metallization

Enhanced diffusion barrier property of nanolayered NbMoTaW/TiVCr high entropy alloy for copper metallization

Improved diffusion barrier performance of Ru/TaN bilayer by N effusion in TaN underlayer

Atomic layer deposition of amorphous Ni-Ta-N films for Cu diffusion barrier

Diffusion Barrier Properties of Ta Films Deposited with Different Rates

TaN Diffusion Barrier Layers Deposited by Reactive Magnetron Sputtering

Structural stability of thermoelectric diffusion barriers: Experimental results and first principles calculations

Study of the sputtered Mo/TaN and Mo-Ta thin film as diffusion barrier for copper metallization

Diffusion Barrier Properties Of Amorphous And Nanocrystalline Ta Films For Cu Interconnects

Effect of tantalum and Ni Ta barriers on inter-diffusion between nickel coating and GH3535 alloy at 700 °C

Tan/Ta As an Effective Diffusion Barrier for Direct Contact of Copper and Nisi

Mechanical Properties and Thermal Stability of TiAlN/Ta Multilayer Film Deposited by Ion Beam Assisted Deposition