Abstract:Three-dimensional (3D) integration technology using Cu interconnections has emerged as a promising solution to improve the performance of silicon microelectronic devices. However, Cu diffuses into SiO2 and requires a barrier layer such as Ta to ensure acceptable reliability. In this paper, the effects of temperature and strain normal to the interface on the inter-diffusion of Cu and Ta at annealing conditions are investigated using a molecular dynamics (MD) technique with embedded atomic method (EAM) potentials. Under thermal annealing conditions without strain, it is found that a Cu-rich diffusion region approximately 2 nm thick is formed at 1000 K after 10 ns of annealing. Ta is capable of diffusing into the interior of Cu but Cu hardly diffuses into the inner lattice of Ta. At the Cu side near the interface an amorphous structure is formed due to the process of diffusion. The diffusion activation energy of Cu and Ta are found to be 0.9769 and 0.586 eV, respectively. However, when a strain is applied, a large number of crystal defects are generated in the sample. As the strain is increased, extrinsic stacking faults (ESFs) and lots of Shockley partial dislocations appear. The density of the dislocations and the diffusion channels increase, promoting the diffusion of Cu atoms into the inner lattice of Ta. The thickness of the diffusion layer increases to 4 times the value when only a temperature load of 700 K is applied. The MD simulations demonstrated that Ta is very effective as a barrier layer under thermal loading only, and its effectiveness is impaired by tensile strain at the Cu/Ta interface. The simulations also clarified the mechanism that caused the impairment. The methodology and approach described in this paper can be followed further to study the effectiveness of barrier layers under various annealing and strain conditions, and to determine the minimum thickness of barrier layers required for a particular application.

Interface Stability and Microstructure of an Ultrathin Α-Ta/graded Ta(N)/TaN Multilayer Diffusion Barrier

Design and Fabrication of Ultrathin and Highly Thermal-Stable Α-Ta/graded Ta(N)/TaN Multilayer As Diffusion Barrier for Cu Interconnects

Thermal stability and microstructure of graded α-Ta(N)/TaN bi-layer diffusion barrier

Growth of nanoscale Ta-Al-N diffusion barriers

COMPARATIVE STUDY OF IONIZED METAL PLASMA Ta, TaN AND MULTISTACKED Ta/TaN STRUCTURE AS DIFFUSION BARRIERS FOR Cu METALLIZATION

Superior Thermal Stability of Ta/Tan Bi-Layer Structure for Copper Metallization

Diffusion Barrier Properties Of Amorphous And Nanocrystalline Ta Films For Cu Interconnects

Diffusion behavior of Cu/Ta heterogeneous interface under high temperature and high strain: An atomistic investigation

Effect of Thickness Scaling on the Permeability and Thermal Stability of Ta(N) Diffusion Barrier

Thermal stability of Ta-Si-N/Zr barrier in Cu metallization

Atomic layer deposition of amorphous Ni-Ta-N films for Cu diffusion barrier

Thermal Stability of Ultrathin RuC Film As Cu Diffusion Barrier

Comparison of Ru/Ta and Ru/TaN as Barrier Stack for Copper Metallization

Preparation and Properties Characterization of Gradient Alpha-Ta(N)/Tan Bi-Layer Diffusion Barrier

Study of the sputtered Mo/TaN and Mo-Ta thin film as diffusion barrier for copper metallization

High-Temperature Ta Diffusion in the Grain Boundary of Thin Cu Films

Improved Barrier Properties of Ultrathin Ru Film with Tan Interlayer for Copper Metallization

Tan/Ta As an Effective Diffusion Barrier for Direct Contact of Copper and Nisi

Sputtered Ru–Ti, Ru–N and Ru–Ti–N Films As Cu Diffusion Barrier

Effect of annealing ambient and diffusion barrier on thermal stability of multilayer

Diffusion Barrier Performance of W/Ta-W-N Double Layers for Cu Metallization