Abstract:Experimental studies of the combustion patterns of the ternary system (100 – x )(Ti + C) – x (Ti + 2B) of bulk density in the powder and granular form used for the synthesis of TiC–TiB 2 composite ceramics are carried out. The study shows that the dependence of the powder mixture's combustion rate on the Ti + 2B content has a non-monotonic character, which is associated with the influence of the impurity gas (IG) release on the combustion process. By removing the influence of the IG by granulation, a monotonic dependence with two characteristic sections is obtained. For the granulated mixture, an increase in the Ti + 2B content to >60 wt % leads to a change from the conductive combustion mode to the convective one, accompanied by a sharp increase in the combustion rate. For the conductive combustion mode, the combustion rate of the substance inside the granule and the combustion transfer time from granule-to-granule are determined, which allows us to estimate the inhibitory effect of the IG release on the combustion rate of powder mixtures of different compositions. For the convective combustion mode, it is shown that a decrease in the content of the gasifying additive in the mixture (granulation with ethyl alcohol) leads to an unexpected result: an increase in the combustion rate of the mixture. For compositions with (Ti + 2B) > 60 wt %, the combustion rate with the counterfiltration of IGs is determined for the first time, which makes it possible to estimate the front rate increase according to the filtration combustion theory. According to the X-ray phase analysis (XPA), the combustion products of all compositions contain only two main phases: TiC and TiB 2

Combustion Synthesis and Densification of Titanium Diboride–copper Matrix Composite

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

The Process of TiB 2 −cu Composite Phase and Structure Formation During Combustion Synthesis

B4C‒TiB2 composite with modified microstructure and enhanced properties from optimal size coupling of raw powders

Preparation and characterization of TiB2-Al2O3 composite powder by combustion synthesis process

Effects of TiB2 Particles on the Microstructure Evolution and Mechanical Properties of B4C/TiB2 Ceramic Composite

Combustion Synthesis of Ti(C,N)-TiB_2 Composite Powders under Super Gravity Conditions

Microstructure and Mechanical Properties of Cu Matrix Composites Reinforced by TiB2/TiN Ceramic Reinforcements

Effects of Boron Content on the Microstructure and Properties of BxC-TiB2 (x=4.5, 6.5 or 8.5) Ceramic Composites by the Reactive Spark Plasma Sintering

Thermal Ablation Resistance of Melt-Infiltrated Titanium Diboride-(Copper, Nickel) Composites

Interaction of a Ti⁻Cu Alloy with Carbon: Synthesis of Composites and Model Experiments

Combustion synthesis of Ti(C, N) TiB2 composite powders under super gravity conditions

Microstructures and mechanical properties of TiB2 composite ceramics with co-addition of Ti and TiC fabricated by SPS

Microstructure, Properties and Strengthening Mechanism of Cu-Tib2-Al2o3 Composite Prepared by Liquid Phase In-Situ Reaction Casting

Enhancement mechanical properties of in-situ preparated B4C-based composites with small amount of (Ti3SiC2+Si)

Combustion Synthesis of TiCxN1−x–TiB2 Ceramic Composites in a High-Gravity Field

Combustion Synthesis of Tib2-Tic-Wb Powders by Coupling Weak with Strong Exothermic Reactions

Optimisation of Properties of Ti3SiC2 Reinforced Copper Matrix Composites

Study of Patterns and Mechanisms of Combustion of a Powdered and Granulated Ti–C–B System