Abstract:The graphical abstract is about transient thermal stress fields of different component materials at different moments of time, changes in relative density and open porosity of ceramic materials at different B4C volume fractions and changes in mechanical properties of ceramic materials at different holding times. In addition, the graphical abstract has information on SEM morphology of specimen sections at different sintering temperatures and SEM images of crack propagation in the TiB2‐20 vol% B4C ceramics. A finite model incorporating microstructure was developed to investigate the thermal shock resistance of TiB2‒B4C composite ceramic cutting tool materials. Numerical simulations were conducted to analyze changes in the transient temperature field and thermal stress field during the thermal shock process. TiB2‒B4C composite ceramic tool materials were fabricated using discharge plasma sintering technology. With different B4C contents, different sintering temperatures and holding times as study variables, optimization of the sintering process parameters and ceramic material components was achieved through testing the mechanical and microscopic morphology of the ceramics. Thermal shock water quenching experiments were performed, and the strength‐decay method was employed to assess the thermal shock resistance of TiB2‒B4C ceramics. The findings indicate that the optimal sintering conditions are temperature of 1700°C and holding time of 5 min. The TiB2‒B4C ceramic material containing 20 vol% B4C exhibits superior comprehensive mechanical properties and thermal shock resistance, and its relative density, fracture toughness, hardness, and flexural strength were 99.3%, 6.8 MPa m1/2, 22.8 GPa, and 598 MPa, respectively. The critical thermal shock temperature difference falls within the range of 400°C‒500°C.

Thermal Ablation Resistance of Melt-Infiltrated Titanium Diboride-(Copper, Nickel) Composites

Microstructural Characterization and Ablation Mechanism of TiB2/(Cu,Ni) Melt-Infiltrated Ceramic Composite

Preparation and thermal ablation behavior of titanium diboride/(copper, nickel) C4 material

Ablation-Resistance of Combustion Synthesized TiB2-Cu Cermet: Ablation-Resistance of Combustion Synthesized Cermet

Thermal Shock Resistance and Ablation Behavior of Tib2-Cu-Ni Composite Via Combustion Synthesis

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Transpiration Cooling Behavior of TiB2-(Cu,Ni)Interpenetrating Phase Composites by Arc Plasma Heater

Ablation-resistance behavior of sweat cooling TiB2-Cu matrix interpenetrating phase composites

High-temperature Ablation Behavior of TiB2-Cu Matrix Cermets

Study on the Behavior in Thermal Shock and Ablation Resistance of TiC-TiB2/Cu Ceramic-Matrix Composite

Thermal Shock Resistance and Ablation Behaviour of Titanium Diboride-Copper-Nickle Fgm Via Shs

Mechanical properties and thermal shock resistance of TiB2‒B4C composite ceramic tool materials at microscopic scale

Ablation behaviour of titanium diboride-copper-nickle FGM

Microstructure and mechanical properties of TiB2/(Cu, Ni) interpenetrating phase composites

Thermal Shock Resistance of TiB2–Cu Interpenetrating Phase Composites

Ablation of Tungsten Matrix Composites Reinforced by TiC and ZrC Particles

Enhanced High Temperature Mechanical Properties and Heat Resistance of an Al–Cu–Mg–Fe–Ni Matrix Composite Reinforced with In-Situ TiB 2 Particles

Physical, mechanical, and ablation properties of Cu–Ti3AlC2 composites with various Ti3AlC2 contents

Effects of Heat Treatment on the Microstructure and Mechanical Properties of in Situ Inhomogeneous TiBw/Ti6Al4V Composite Fabricated by Pre–sintering and Canned Powder Extrusion

Effect of NiTi content on the mechanical properties and microstructure of TiB2–TiN-based composite ceramic material prepared using spark plasma sintering

Ablation behavior of high-entropy boride (Hf-Zr-Ta-Ti)B 2 coating fabricated via supersonic atmospheric plasma spraying for carbon/carbon composites