Abstract:Titanium carbide based composites have attracted much attention owing to their light weight, high elastic modulus, and excellent wear resistance. However, the hot working of these composites has been facing great challenges, especially for the coordinated deformation of brittle phase. Here, soft Ti phase was introduced to improve the thermal deformation ability. In particular, the dynamic recrystallization (DRX) mechanism, crack propagation, and dislocation motion behavior of brittle Ti2C matrix were unveiled in this study. Firstly, a Ti2C-Ti composite was hot compressed at 770-1000 degrees C with strain rates of 0.012-0.0013 s-1. The results showed that the optimal processing temperature was 950 degrees C, at which the microstructure can be refined by DRX behavior without the occurrence of macro instability. In the later softening stage of hot compression, the recrystallized Ti2C grains were formed through both discontinuous dynamic recrystallization (DDRX) and continuous dynamic recrystallization (CDRX). The intergranular Ti phase, which acts as a binder, coordinated the deformation of the Ti2C-Ti composite, and the phase boundaries attracted dislocations on the side of the brittle Ti2C phase. This dislocation motion behavior mitigated stress concentration but inhibited the DRX behavior of the Ti2C phase near the binary phase interfaces. The lamellar Ti precipitates within Ti2C grains facilitated the occurrence of CDRX by promoting the formation of subgrains. The subgrain boundaries were formed when the average distance between dislocation on the dislocation wall was lower than 8.68 nm. Compared with the as-sintered composite, the nanohardness of the Ti2C matrix in the composite deformed at 950 degrees C increased by 17%. The enhanced hardness was mainly attributed to grain boundary and dislocation strengthening effect, as well as the reduction of Ti precipitates.

Transient plastic phase processing of titanium-boron-carbon composites

Thermomechanical Processing of (tib + TiC)/Ti Matrix Composites and Effects on Microstructure and Tensile Properties

Superplasticity of In-Situ Synthesized (tib+tic)/7715d Titanium Matrix Composite

Preparation and thermal ablation behavior of titanium diboride/(copper, nickel) C4 material

Thermomechanical Processing of a Near-α Ti Matrix Composite Reinforced by TiBw

Effect of Powder Synthesis Processing on Microstructure and Mechanical Properties of TiB2-TiC Composite Ceramics

The Α Phase Recrystallization Mechanism and Mechanical Properties of a Near-Α Titanium Matrix Composite

Mechanical And Microstructure Evaluation Of In-Situ Titanium Matrix Composite Processed By Severe Plastic Deformation

Behavior and microstructure of high temperature plastic deformation of TiC/Ti composite

Microstructure and mechanical behaviour of transient liquid phase spark plasma sintered B4C–SiC–TiB2 composites from a B4C–TiSi2 system

Effects of TiB2 Particles on the Microstructure Evolution and Mechanical Properties of B4C/TiB2 Ceramic Composite

Revealing Hot Deformation Behavior of Ti2C-Ti Composite and Associated Dynamic Recrystallization Mechanism of Ceramic Matrix

Processing and Characteristics of TiB 2 Toughened B-Ti-C Composites

Effect of (α + Β) Heat Treatment on Microstructure and Mechanical Properties of (tib + TiC)/Ti–B20 Matrix Composite

Significantly Enhanced Superplasticity of TiBw/near-α Ti Composite: Microstructure Tailoring and Deformation Mechanisms

Mechanical properties and thermal shock resistance of TiB2‒B4C composite ceramic tool materials at microscopic scale

Self-propagating high-temperature synthesis of TiC-TiB2 multiphase ceramics

Microstructure and compressive properties of in situ synthesized (TiB + TiC)/Ti composites

Deformation Behavior and Softening Mechanism of TiB Reinforced Near-Α Titanium Matrix Composite During Hot Compression

Microstructure and Mechanical Properties Variation of Tib/Ti Matrix Composite by Thermo-Mechanical Processing in Beta Phase Field

Mechanisms Behind the Superplastic Behavior of As-Extruded Tibw/Ti6al4v Composites with A Network Architecture