Abstract:The heat transfer performance of a heat pipe using acetone as working fluid is experimentally studied and discussed in this paper.A novel heat pipe array was designed and expected to be utilized in integrated waste heat recovery equipment with higher heat transfer efficiency at lower temperature heat sources.The device is composed of five vertical evaporation sections which are connected at the bottom,and a horizontal concentric tube condensing section.The heat transfer performance of a new type of thermosiphon waste heat recovery unit was analyzed by theoretical and experimental methods,and the structural parameters of the device were optimized.The influence of inclination angle of 15° ～ 90°,operation temperature of 40 ～ 80 ℃ and cooling water temperature of 10 ～ 30 ℃ on heat transfer performance of the device was studied.It is found that the new gravity heat pipe waste heat recovery device has good isothermal performance and operation stability.When the liquid filling ratio is 15％,the inclination angle is 60°,the cooling water temperature is 30 ℃,the heat exchanger reaches the best working state.The maximum heat transfer rate is about 1 700 W,and the average thermal resistance is 0.042 ℃/W.

Experimental Study on Semi-Open Heat Pipes and Its Applications

Theoretical and Experimental Research on Heat Transfer Performance of the Semi-Open Heat Pipe

Experimental investigation on heat transfer performance of closed-loop pulsating heat pipe with large inner diameter

Experimental investigation of flow visualization and thermal performance of flat-plate single-loop pulsating heat pipes

Experimental study of flow patterns and improved configurations for pulsating heat pipes

Experimental studies to heat transfer characteristics of separated heat pipes

Influence of Inclination Angle and Cooling Water Temperature on the Heat Transfer Performance of a Novel Closed Gravity Heat Pipe Exchanger

Experimental Study on Start-Up Characteristics of Loop Heat Pipes

Experimental and Numerical Investigations of a Radial Heat Pipe for Waste Heat Recovery

Experimental investigation on flow and heat transfer of pulsating heat pipe

Application Research Situation and Prospect of Pulsating Heat Pipe and Nano-fluid Technology in Heat Exchanger

Experimental Study on Energy Saving of Fluidized Bed Dryer with Self-Excited Mode Oscillating-Flow Heat Pipe Heat Exchanger

EXPERIMENTAL STUDY ON HEAT TRANSFER PERFORMANCE OF TEMPERATURE ADAPTIVE OSCILLATING HEAT PIPE

Advances in Start-up Studies and Operation of Pulsating Heat Pipe

Advances in Study of Start-Up Performance of Heat Pipes

Progress in Performance and Application Study for Wound-tube Heat Exchanger

Experimental Investigation on the Application Potential of Finless Heat Exchanger with Mini-Diameter Tubes Utilized As Air Heater or Air Cooler

Heat Transport Characterastics in Closed Loop Oscillating Heat Pipes

Study on Problems Occurring in Early Stage of Visualization Experiment on Pulsating Heat Pipe

Experimental Research and Simulation in a Thermosyphon

Summary research on pulsating heat pipe