Abstract:A significant challenge is posed in improving the thermal performance of heat exchangers by the reduction of the outlet temperature. To confront this intricacy, distinct water‐based nanofluids with two different material conditions are employed by the established framework. Through comprehensive examination, a novel framework has been developed that offers improved thermal performance by reducing the outlet temperature and providing enhanced cooling compared to other working fluids. Valuable insights into optimizing thermal management systems are demonstrated. Researchers and engineers are actively working on enhancing the efficiency of heat exchangers in engineering applications by developing novel designs, exploring new materials, and utilizing nanofluids. Three kinds of nanofluids with varying concentrations are investigated in this paper. The objective is to assess the performance of N‐shaped double‐pipe heat exchanger used in thermoelectric power plants. The performance has been evaluated using COMSOL Multiphysics software. The findings show that higher nanofluid concentrations resulted in elevated heat transfer coefficients and improved efficiency of N‐shape double pipe heat exchanger. The analysis revealed that a mere 1% rise in the volume fraction of nanofluids enhanced the efficiency of the heat exchanger on average 23% when compared to the base fluid (water). In comparison to the N‐shape double pipe (Inconel 625) heat exchangers, the N‐shape double pipe (copper) heat exchangers appear to be more efficient. The introduction of nanoparticles has a notable impact on the heat transfer coefficients. Specifically, within an N‐shaped double pipe (copper) heat exchanger, the inclusion of a 1% volume fraction results in a 2.09% enhancement in the heat transfer coefficient for Al2O3/water, a 1.3% improvement for Fe3O4/water, and a 1.15% increase for TiO2/water. It also exposed that adding 1% Al2O3/water led to a significant 0.623% increase in effectiveness, while TiO2/water showed a 0.259% rise, and Fe3O4/water exhibited a 0.375% improvement. Moreover, increasing the Reynolds number enhances the Nusselt number for Al2O3/water and Fe3O4/water nanofluids by 55.22%, and for TiO2/water by 54.60% at a 6% volume concentration, leading to additional increases in exchanger efficiency. Therefore, the augmentation in nanofluid concentration leads to a reduction in the temperature pinch points both at the intake and outflow. This observation suggests that nanofluids exhibit a superior ability compared to conventional fluids when it comes to effectively lowering temperatures.

Application Research Situation and Prospect of Pulsating Heat Pipe and Nano-fluid Technology in Heat Exchanger

Review of the Development of Pulsating Heat Pipe for Heat Dissipation

Experimental Study on Semi-Open Heat Pipes and Its Applications

Experimental Investigation on the Temperature Distribution Characteristics of the Evaporation Section in a Pulsating Heat Pipe

Review of Operation Performance and Application Status of Pulsating Heat Pipe

Investigation on the enhancement of heat transfer in counterflow double-pipe heat exchanger using nanofluids

Design and Analysis of Heat Pipe Heat Exchanger Efficiency

Review of Recent Applications of Heat Pipe Heat Exchanger Use for Waste Heat Recovery

Molecular dynamics study of convective heat transfer mechanism in a nano heat exchanger

Investigation of heat transfer characteristics in heat pipe heat exchanger for space application

FLOW AND HEAT TRANSFER CHARACTERISTICS IN NANOFLUID OSCILLATING HEAT PIPES

Principle, Fabrication and Applications of Micro-Nano Fluid Dynamics

Experiment on Heat Exchanger Using Innovative Coils and Phase Change Material/MXene Nanofluids

A Comprehensive Review of Thermal Performance Improvement of High-Temperature Heat Pipes

Field synergy analysis of heat transfer characteristics of mixed nanofluid flow in self-excited oscillating heat exchanger tubes

Current Research Status,Difficulties and New Strategy in Utilization of Low Grade Heat

Thermal performance investigation of N‐shape double‐pipe heat exchanger using Al2O3, TiO2, and Fe3O4‐based nanofluids

Nanotechnology Applications in Ground Heat Exchanger Pipes: A Review

Research Progress of Finned Tube Heat Exchanger

On the Role of Nanofluids in Thermal-hydraulic Performance of Heat Exchangers-A Review

Advances in Reseach on Intensified Heat Transfer Techniques of Tube Pass for Shell-and-Tube Heat Exchanger