Abstract:Heat pipes and two-phase thermosyphon systems are passive heat transfer systems that employ a two-phase cycle of a working fluid within a completely sealed system. Consequently, heat exchangers based on heat pipes have low thermal resistance and high effective thermal conductivity, which can reach up to the order of (105 W/(m K)). In energy recovery systems where the two streams should be unmixed, such as air-conditioning systems of biological laboratories and operating rooms in hospitals, heat pipe heat exchangers (HPHEs) are recommended. In this study, an experimental and theoretical study was carried out on the thermal performance of an air-to-air HPHE filled with two refrigerants as working fluids, R22 and R407c. The heat pipe heat exchanger used was composed of two rows of copper heat pipes in a staggered manner, with 11 pipes per row. Tests were conducted at different airflow rates of 0.14, 0.18, and 0.22 m3/h, evaporator inlet-air temperatures of 40, 44, and 50°C, filling ratios of 45%, 70%, and 100%, and ratios of heat capacity rate of the evaporator to condenser sections (Ce/Cc) of 1 and 1.5. For HPHE's steady-state operation, a mathematical model for heat-transfer performance was set and solved using MATLAB. Results illustrated that the heat transfer rate was in direct proportion with the evaporator inlet-air temperature and flow rate. The highest HPHE's effectiveness was obtained at a 100% filling ratio and (Ce/Cc) of 1.5. The predicted and experimental values of condenser outlet-air temperature were in good agreement, with a maximum difference of 3%. HPHE's effectiveness was found to increase with the increase in evaporator inlet-air temperature and number of transfer units (NTU) and with the decrease in airflow rate, up to 33% and 20% for refrigerants R22 and R407c, respectively. Refrigerant R22 was the superior of the two refrigerants investigated.

Experimental comparison and numerical study of flow and heat transfer characteristics of the pipe rows in heat pipe heat exchanger

Experimental Investigation on the Temperature Distribution Characteristics of the Evaporation Section in a Pulsating Heat Pipe

Simulation of Steady-State Operation of an Ejector-Assisted Loop Heat Pipe with a Flat Evaporator for Application in Electronic Cooling

Experiments and comparisons of three miniature heat pipes' thermal performance

Experimental study on the thermal performance of a liquid-cooled heat sink integrating heat pipes for dual CPU servers

Experimental Study on a Hydrogen Closed-Loop Pulsating Heat Pipe with Two Turns

Numerical Study of the Thermal Performance of a Hydrogen Pulsating Heat Pipe

Experimental and Theoretical Study on Operation Characteristics of an Oscillating Heat Pipe

Numerical investigation on thermal behavior of high temperature heat pipe based on thermal resistance network model

Experimental Investigation Thermal Performance of Loop Heat Pipe Operating with Different Working Fluids

Comparative analysis of thermal performance in heat pipe heat exchangers employing two distinct convective heat transfer media

Numerical investigation into the gas-liquid two-phase flow regime and heat transfer characteristics in a gravity heat pipe

Experimental Investigation on the Thermal Performance of Pulsating Heat Pipe Heat Exchangers

Design and Analysis of Heat Pipe Heat Exchanger Efficiency

Experimental investigation on the thermal performance of a novel loop heat pipe (LHP) with micro-channel structure

Experimental study on a rectangular evaporator loop heat pipe with a phase-change material heat sink

Numerical investigation on transient and steady phase change heat transfer in the evaporator of a loop heat pipe

Theoretical and experimental investigation of a heat pipe heat exchanger for energy recovery of exhaust air

Theoretical and Experimental Study on Heat Transfer Characteristics of Water Heat Pipe

An Improved Model of the Heat Pipe Based on the Network Method Applied on a Heat Pipe Cooled Reactor

Experimental investigation on a flat loop heat pipe coupled with thermoelectric cooler