Abstract:It's a significant challenge to choose a suitable heat dissipation method in different electronics assembly environments requiring different heat transfer distances. Oscillating heat pipes are promising heat exchangers, but localized dry-out during operation leads to an unstable heat transfer and limits further application of oscillating heat pipes. To extend the applicability of oscillating heat pipes, it is essential to reveal the localized dry-out characteristics under various heat transfer distances. In this study, the impact of localized dry-out on the multi-stage operating characteristics of ethanol-oscillating heat pipes with various heat transfer distances was investigated through partial visualization experiments. The anti-dry-out capacity of ethanol-oscillating heat pipes was quantitatively evaluated and compared with that of water-oscillating heat pipes. The experimental results revealed that the dry-out performance was closely related to the flow motion of the operating fluid. The stagnation of the operating fluid was the primary cause of localized dry-out. Localized dry-out deteriorated the startup and heat transfer performances of oscillating heat pipes. The anti-dry-out capacity first improved and then diminished as the heat transfer distance increased. The results also revealed that ethanol exhibited superior dry-out performance compared to water, especially at long heat transfer distances. Besides, an empirical correlation equation was fitted to evaluate the anti-dry-out capacity of oscillating heat pipes under different heat transfer distances based on the experimental results. The empirical correlation equation about the Ku number could be a reasonable predictor of the anti-dry-out capacity of oscillating heat pipes. The predicted results were in good agreement with the experimental results, with 86 % of the data deviating within +/- 20 % and an average standard deviation of 19.72 %. This research closed the gap in the prediction for the anti-dry-out capacity and provided a valuable reference to broaden the applicability of oscillating heat pipes.

An experimental investigation on oscillating heat pipe under trans-critical conditions

Experimental and Theoretical Study on Operation Characteristics of an Oscillating Heat Pipe

Experimental Investigation on the Temperature Distribution Characteristics of the Evaporation Section in a Pulsating Heat Pipe

Review of the Development of Pulsating Heat Pipe for Heat Dissipation

Experimental Investigation on the Heat Transfer Performance and Evaporation Temperature Fluctuation of a New-Type Metal Foam Multichannel Heat Pipe

Investigation on the Influence of Different Heat Transmission Distances on Thermo-Hydrodynamic Characteristics of Pulsating Heat Pipes

Effect of Localized Dry-out on Startup and Steady-State Operation Characteristics of Ethanol-Based Oscillating Heat Pipes

Partial Visualization Study on Flow, Startup and Heat Transfer Characteristics of Closed-Loop Pulsating Heat Pipe with R1336mzz(Z)

Visualization study of a high-temperature oscillating heat pipe using X-ray imaging

Numerical Study of the Thermal Performance of a Hydrogen Pulsating Heat Pipe

Quantitative analysis of thermal performance and flow characteristics of oscillating heat pipes with different initial pressure

Experimental Study on a Hydrogen Closed Loop Pulsating Heat Pipe with Different Adiabatic Lengths

Experimental study on a rectangular evaporator loop heat pipe with a phase-change material heat sink

Numerical Investigation on Pulsating Heat Pipes with Nitrogen or Hydrogen

Silicon-based microscale-oscillating heat pipes for high power and high heat flux operation

Experimental Study on the Thermo-Hydrodynamic Characteristics of a Nitrogen Pulsating Heat Pipe

Experimental Study on a Hydrogen Closed-Loop Pulsating Heat Pipe with Two Turns

Experimental Study on a Hydrogen Pulsating Heat Pipe in Different Heating Modes

Experimental investigation on a pulsating heat pipe with low number of turns at liquid hydrogen temperature range

Experimental Study on Startup and Heat Transfer Performance of High Temperature Sodium Heat Pipe

Experimental investigation on the thermal performance of a novel loop heat pipe (LHP) with micro-channel structure