Abstract:Non-uniform high-temperature large heat flux is commonly encountered in engineering applications, posing challenges to heat transfer processes and affecting system performance. High temperature heat pipes offer an effective solution to mitigate the adverse effects of non-uniform heat flux by leveraging the unique characteristics of their inner alkali metal (or alloy) working fluid, such as high latent heat of vaporization, strong heat flux density, and ability to operate at elevated temperatures. These features enable high temperature heat pipes to achieve excellent isothermal and uniform heat transfer performance, thereby improving overall thermal management in heat transfer systems. Building upon the investigation of the original high temperature heat pipe, this study designed and fabricated a specially shaped high temperature heat pipe with a spherical crown surface as the evaporator. Experimental research was conducted to assess its frozen start-up performance and heat transfer characteristics under the influence of axial non-uniform heat flux. The results were also analyzed theoretically, providing valuable insights into the frozen start-up performance and heat transfer performance of the high temperature heat pipe in the presence of non-uniform heat flux conditions. The analysis results reveal several important findings: (1)The high temperature heat pipe demonstrates its capability to convert axial non-uniform high-temperature large heat flux into a uniform heat flux, thus achieving excellent uniform heat transfer performance. (2)The theoretical solution obtained through the lumped heat capacity analysis method shows satisfactory agreement with the actual frozen start-up process of the high temperature heat pipe. This theoretical reference can aid in the transient analysis of the frozen start-up process under the influence of axial non-uniform high-temperature large heat flux. (3)The experiment investigated the influence of heating power on heat transfer performance and temperature uniformity. The results indicate that the temperature uniformity of the high temperature heat pipe exhibits a trend of initially increasing and then decreasing. Specifically, the best temperature uniformity is achieved when the heating power is 1084.7 W. Moreover, when the heating power is 1197.9 W, the high temperature heat pipe exhibits the lowest equivalent thermal resistance of 0.0265 K/W, indicating the best heat transfer performance. (4) The variable power heating approach demonstrates that increasing the heating power leads to an extension of the effective length of the heat pipe. The most favorable heat transfer performance and temperature uniformity are observed when the heating power is set to 1133.7 W, allowing the full length of the condenser of the high temperature heat pipe to participate actively in the heat transfer process. These results can provide quantitative experimental data and theoretical references for improving the thermal shock of non-uniform high-temperature large heat flux.

Comparative study of a novel liquid–vapour separator incorporated gravitational loop heat pipe against the conventional gravitational straight and loop heat pipes – Part II: Experimental testing and simulation model validation

Comparative Study of a Novel Liquid–vapour Separator Incorporated Gravitational Loop Heat Pipe Against the Conventional Gravitational Straight and Loop Heat Pipes – Part I: Conceptual Development and Theoretical Analyses

Performance Analysis of a Separator Assisted Two-Phase Thermosyphon Based on an Experimentally Validated Model

Theoretical and Experimental Research on Heat Transfer Performance of the Semi-Open Heat Pipe

Experimental Study on Semi-Open Heat Pipes and Its Applications

Heat Transfer Performance and Startup Characteristics of Separated Gravity Heat Pipe

Experimental investigation on the start-up performance of a novel flat loop heat pipe with dual evaporators

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

A discussion of internal flow characteristics and performance of super long gravity heat pipes for deep geothermal energy extraction

Study of the heat transfer performance of gravity heat pipes based on lattice Boltzmann surface modification

Performance of a novel loop heat pipe coupled with micro vapor-driven jet injector – An experimental and numerical study

Numerical investigation into the gas-liquid two-phase flow regime and heat transfer characteristics in a gravity heat pipe

Two-Phase Flow Visualization and Heat Transfer Characteristics Analysis in Ultra-Long Gravity Heat Pipe

Numerical investigation on transient and steady phase change heat transfer in the evaporator of a loop heat pipe

Experimental comparison and numerical study of flow and heat transfer characteristics of the pipe rows in heat pipe heat exchanger

Comparative and sensitive analysis on the filling, operating and performance patterns between the solar gravity heat pipe and the traditional gravity heat pipe

Research on Cryogenic Loop Heat Pipe Technology

A review of liquid metal high temperature heat pipes: Theoretical model, design, and application

Experimental investigation and multiparameter analysis of variable conductance heat pipes

Experimental study on heat transfer performance of high temperature heat pipe under axial non-uniform heat flux

Experimental investigation on the start-up performance of a loop heat pipe with three flat disk evaporators combined