Investigation on the Nucleation of PLC Shearing Deformation Band with High-Speed DSPI Method

LIU Hao-wen,ZHANG Qing-chuan,XIANG Guo-fu,LU Jun-yong,WU Xiao-ping

DOI: https://doi.org/10.3969/j.issn.1001-4888.2006.04.002

2006-01-01

Abstract:The Portevin-Le Chatelier(PLC) effect associated with avalanching shear deformation will occur during a tensile test for many alloy materials.A technique based on a high-speed(1000 fps) digital speckle pattern interferometry(DSPI) was used for investigating the nucleation of Portevin-Le Chatelier(PLC) deformation bands.With the help of this method,the digital images of the instant nucleation process were captured successfully.Analyzing these images by sequential method,the deformation distribution of the specimen surface was acquired.The results show that there are two main nucleation formats which associated with three different types of PLC deformation bands:(i) at the observation plane,the type-A band initiates as a sample-scale narrow band at an angle of 60°with respect to the tensile axis,then with the drop of the stress,the narrow band begins to expand in its width direction and reachs its final width;(ii) at the observation plane,the type-B and type-C bands initiate at a lateral specimen surface as a narrow band at an angle of 60° with respect to the tensile axis,and this narrow band has half of its final length.Subsequently the band front begins to propagate to the other lateral specimen surface along its length direction and expands in its width direction accompanying with the drop of the stress.When the front of the band reaches the other lateral surface,the band begins to expand in its width direction instantly and avalanching shear deformation happens.