Abstract:In view of its high precision and high efficiency, three-dimensional digital image correlation (3D-DIC) is widely used to accurately measure full-field deformation. A spatiotemporal experimental study using 3D-DIC to explore the Portevin–Le Chatelier (PLC) deformational behavior, provides a new insight into the whole 3D deformation field, including the out-of-plane displacement, and in particular the relationship between the serrations and the strain field in the deformation bands corresponding to individual serrations. Specimens 1, 2 and 3 mm thick of 5456 Al-based alloy were tested in uniaxial tension at room temperature at strain rates from 1.8 × 10 −4 to 9.1 × 10 −3 s −1 . The spatial and temporal characteristics of the strain localization were quantitatively analyzed. The out-of-plane displacement increment field ( w ) of the localized bands was observed by 3D-DIC, and found to be related to the specimen thickness and the in-plane strain increment. The largest displacement increments were respectively 15, 10 and 5 μ m for 3, 2 and 1 mm specimens at maximum strain increment of about 12000 μ ε . The elastic shrinkage outside the deformation bands was found to be an essential characteristic of the PLC effect. The width of the PLC band ( w b a n d ) increased with increasing thickness; the angle of the PLC band ( 𝜃 b a n d ) was not affected by either specimen thickness or serration amplitude. Temporally, the serrations in the plots both of in-plane strain and out-of-plane displacement vs. time coincided throughout the entire loading procedure. When PLC banding occurred, the serration amplitude within the bands was found to be proportional to the maximum strain increment in the direction of the applied tensile force ( 𝜖 m a x ).

Deformation Measurements of Serrated Yielding Shear Bands in Al-4%Cu Alloy

On the Propagation and Pulsation of Portevin-Le Chatelier Deformation Bands: an Experimental Study with Digital Speckle Pattern Metrology

Characterization of the deformation behaviors associated with the serrated flow of a 5456 Al-based alloy using two orthogonal digital image correlation systems

Thermal Analysis of Serrated Yielding in an Al-Mg Alloy

Investigation on the Portevin-Le Chatelier Deformation Bands in Al-Cu Alloys

The Portevin-Le Chatelier Effect in Al-Mg Alloy Investigated by Infrared Pyrometry

Study of Propagation and Pulsation of Slip Band Using Dynamic Digital Speckle Pattern Interferometry

DIC/DSI Based Studies on the Local Mechanical Behaviors of HR3C/T92 Dissimilar Welded Joint During Plastic Deformation

Digital Shearography Investigation on the Out-Plane Deformation of the Portevin-Le Chatelier Bands

Spatial characteristics of the Portevin-Le Chatelier deformation bands in Al-4 at%Cu polycrystals

Tensile Deformation Behaviors of CuNi Alloy Processed by Equal Channel Angular Pressing

Deformation Measurements of Three Types of Portevin–Le Chatelier Bands

Investigation on the Nucleation of PLC Shearing Deformation Band with High-Speed DSPI Method

Experimental investigations on kinetics of Portevin–Le Chatelier effect in Al–4wt.%Cu alloys

White-Light Digital Speckle Image Correlation Analysis of the Portevin-Le Chatelier Shearing Band in Multiscale

Preliminary Time Series Analysis of Serrated Yielding in Al-4%Cu Alloy

Experimental Study on Three-Dimensional Deformation Field of Portevin–Le Chatelier Effect Using Digital Image Correlation

Experimental Study and Mechanism Analysis of the Serrated Plastic Instability of Alloy Materials

Visualization of Formation and Propagation of Local Deformation Slip-Band of Metal Material with Speckle Interferometry Method

Time-resolved deformation measurements of the Portevin–Le Chatelier bands

Investigation of Kinematics of the Portevin-Le-Chatelier Deformation Bands with Dynamic Digital Speckle Pattern Interferometry