Abstract:The phenomena of Portevin-Le Chatelier (PLC) band propagation and its pulsation accompanying the serration of load curve in a tensile test (constant load strain rate: 10(-5)/s) of aluminum alloy were directly observed by using dynamic digital speckle pattern interferometry (DSPI) method. In the plastic deformation stage, a slip band is formed and propagates repeatedly along the tensile direction with a certain speed (the beginning speed is several mm/s) and a certain bandwidth (several mm). The propagation speed decreases gradually with the increasing of plastic deformation, and finally the specimen cracks at the position where the band stops. The same slip fringe patterns observed from the front surface and rear surface of the specimen simultaneously show that the slip plane goes through the thickness of specimen. Pulsation of fringe density in the inside of the slip band accompanying with the serrations of load curve was observed. The pulsation period corresponds with the width of the serration. When the load falls in the serrations, the slip deformation happens just like an avalanche, and the time of the avalanchine slip is less than 0.03 seconds. Corresponding to the happening of the avalanchine slip, dense shrinkage fringes appear on the outside of the slip band. The specimen takes a shrinkage deformation in the outside of the slip band to compensate the elongation deformation in slip band at the moment of avalanchine slip, even for a tensile test. The elongation value in the inside of the slip band causing by the avalanchine slip is in the order of 10 mum by calculating with observed results.

Investigation of Kinematics of the Portevin-Le-Chatelier Deformation Bands with Dynamic Digital Speckle Pattern Interferometry

On the Propagation and Pulsation of Portevin-Le Chatelier Deformation Bands: an Experimental Study with Digital Speckle Pattern Metrology

Time-resolved deformation measurements of the Portevin–Le Chatelier bands

Deformation Measurements of Three Types of Portevin–Le Chatelier Bands

The Portevin-Le Chatelier Effect in Al-Mg Alloy Investigated by Infrared Pyrometry

Investigation on the Portevin-Le Chatelier Deformation Bands in Al-Cu Alloys

Investigation of Portevin-Le Chatelier Band with Temporal Phase Analysis of Speckle Interferometry

Investigation on the Nucleation of PLC Shearing Deformation Band with High-Speed DSPI Method

Study of Propagation and Pulsation of Slip Band Using Dynamic Digital Speckle Pattern Interferometry

Spatial characteristics of the Portevin-Le Chatelier deformation bands in Al-4 at%Cu polycrystals

Experimental investigations on kinetics of Portevin–Le Chatelier effect in Al–4wt.%Cu alloys

Investigation of Propagation and Pulsation of Slip Band Using Dynamic Dspi

Digital Shearography Investigation on the Out-Plane Deformation of the Portevin-Le Chatelier Bands

Propagation characteristics of portevin-Le chatelier bands

A simple method enabling efficient quantitative analysis of the Portevin–Le Chatelier band characteristics

White-Light Digital Speckle Image Correlation Analysis of the Portevin-Le Chatelier Shearing Band in Multiscale

OS12-2-2 Time-resolved Deformation Measurements of the PLC Shearing Bands

Characterization of the deformation behaviors associated with the serrated flow of a 5456 Al-based alloy using two orthogonal digital image correlation systems

Three Types of Portevin–Le Chatelier Effects: Experiment and Modelling

Visualization of Formation and Propagation of Local Deformation Slip-Band of Metal Material with Speckle Interferometry Method

Investigation of Slipband Propagation in Aluminum Alloy with Dynamic Speckle Interferometry