Abstract:The morphology of gold nanoparticles (AuNPs) deposited on a (100) silicon wafer by simple immersion in a solution containing a metal salt and hydrofluoric acid (HF) is altered by HF treatment both before and after deposition. The gold clusters are characterized by the presence of flat regions and quasispherical particles consistent with the layer-by-layer or island growth modes, respectively. The cleaning procedure, including HF immersion prior to deposition, affects the predominantly occurring gold structures. Flat regions, which are of a few tens of nanometers long, are present after immersion for 10 s. The three-dimensional (3D) clusters are formed after a cleaning procedure of 4 min, which results in a large amount of spherical particles with a diameter of ≈15 nm and in a small percentage of residual square layers of a few nanometers in length. The samples were also treated with HF after the deposition and we found out a general thickening of flat regions, as revealed by TEM and AFM analysis. This result is in contrast to the coalescence observed in similar experiments performed with Ag. It is suggested that the HF dissolves the silicon oxide layer formed on top of the thin flat clusters and promotes the partial atomic rearrangement of the layered gold atoms, driven by a reduction of the surface energy. The X-ray diffraction investigation indicated changes in the crystalline orientation of the flat regions, which partially lose their initially heteroepitaxial relationship with the substrate. A postdeposition HF treatment for almost 70 s has nearly the same effect of long duration, high temperature annealing. The process presented herein could be beneficial to change the spectral response of nanoparticle arrays and to improve the conversion efficiency of hybrid photovoltaic devices.

Enlargement of diatom frustules pores by hydrofluoric acid etching at room temperature

Running droplet of interfacial chemical reaction flow

Bonding of Diatom Frustules and Si Substrates Assisted by Hydrofluoric Acid

Hydrofluoric Acid-Assisted Bonding of Diatoms with Sio2-Based Substrates for Microsystem Application

Modifying the thickness, pore size, and composition of diatom frustule in Pinnularia sp. with Al3+ ions

Hydrofluoric Acid Free Synthesis of Macropores on Silicon by Chemical Vapor Deposition and Their Photoluminescence

Mitigation of Surface Damage Growth by Hydrofluoric Acid Etching Combined with Carbon Dioxide Laser Treatment

Purification of biosilica from living diatoms by a two-step acid cleaning and baking method

Experimental study on HF etching of fused silica

Influence of Baking and Acid Cleaning on the Morphology and Composition of Diatom Biosilica

The effect of the temperature of heat treatment process and the concentration and duration of acid leaching on the size and crystallinity of nano-silica powders formed by the dissociation of natural diatom frustule

Experimental Study on Evolution of Chemical Structure Defects and Secondary Contaminative Deposition during HF-Based Etching

Room-temperature Atmospheric Oxidation of Si Nanocrystals after HF Etching

Fluorine‐containing species on the hydrofluoric acid etched silicon single‐crystal surface

Influence of hydrofluoric acid treatment on electroless deposition of Au clusters

The Effect of Etchant Composition on Film Structure During Laser-Assisted Porous Si Growth

Hydrometallurgical Purification of Metallurgical Grade Silicon with Hydrogen Peroxide in Hydrofluoric Acid

Study on HF Vapor-Phase Etching for Suspended Nano Structure Fabrication

Direct Measurement of the Etching Rates on Si(111) and Silicon Dioxide Surfaces in 40% Ammonium Fluoride Aqueous Solution Via Atomic Force Microscopy

Effects of HF Acid on Dissolution of Elemental Si

STUDIES ON THE REACTION OF VAPOR HF WITH SILICON DIOXIDE UNDER POLYMER FILM