Abstract:Using plasma-enhanced chemical vapor deposition (PECVD), a series of diamond-like carbon (DLC) films were prepared on YG8 carbide substrate by changing the enhancement mode and the negative bias voltage of the substrate. The structure and properties of the deposited films were tested by a series of analytical and testing instruments. During the deposition of DLC films, the ability of electrons to collide and ionize the gas is enhanced by increasing the number of electrons and extending the movement path of electrons, which is called electron-assisted enhanced gas ionization. Four different experimental modes (A mode, B mode, C mode, D mode) were set up. Different experimental modes have different degrees of electron-assisted enhancement ability of gas ionization, so different experimental modes are called different enhancement modes. The ions ionized by the electrons participate in the deposition of the film under the traction of the negative bias voltage of the substrate. The results show that: when depositing diamond-like carbon films, the energy of the ion beam is indirectly affected by electron collisions in different enhancement modes and directly affected by the negative bias voltage of the substrate. The higher the enhancement mode, the higher the ion beam energy. The higher the substrate negative bias voltage, the higher the ion beam energy generated by gas source discharge. Under the dual action of enhancement mode and substrate negative bias voltage, the total energy of ions involved in deposition should not be too high or too low, and the synergy of the two makes the properties and quality of the deposited film reach a better value. For industrial large-scale production of tool protection film for cutting aluminum alloy, it is more suitable for high enhancement mode and low negative bias voltage production. Through a series of process optimization to improve and enhance the comprehensive performance of DLC film, it is further applied to the actual processing application field, which has great industrial and social value to realize the large-scale application of DLC film in the field of hard to cut metal processing.

Structure and Topographies of Diamond-Like Carbon Films Produced on Tungsten Pre-Implanted Stainless Steel Substrate by Plasma Immersion Ion Implantation and Deposition

Diamond-Like Carbon Thin Films Deposited On Ti6al4v Alloy Surface By Plasma Gun At Atmospheric Pressure

Deposition of DLC Film on Stainless Steel Substrates Coated by Nickel Using PECVD Method

Diamond-like Carbon Film Synthesized by Ion Beam Assisted Deposition and Its Tribological Properties

Deposition of nano-diamond-like carbon films by an atmospheric pressure plasma gun and diagnostic by optical emission spectrum on the process

Diamond-like Carbon Film on 20 CrNiMo Steel Prepared by Hollow-Cathode Glow Discharge

Ion Beam Assisted Deposition of Diamond-Like Carbon Onto Steel Materials: Preparation and Advantages

Comparative Study Of Mechanical Properties Of A-C : H Films Produced On Tungsten Pre-Implanted Stainless Steel Substrate By Plasma Immersion Ion Implantation And Deposition

Effect of W-doping on the structure and properties of DLC films prepared by combining physical and chemical vapor deposition

Preparation and characterization of diamond-like carbon (DLC) film on 316L stainless steel by microwave plasma chemical vapor deposition (MPCVD)

Nucleation and growth of amorphous carbon film on tungsten-implanted stainless steel substrates

Properties of DLC Films Produced by Pulsed Laser Induced Arc Deposition

Tribological Properties of Graded Diamond-Like Carbon Films on Ti Ion-Implanted Aluminum Substrate

Studies of Diamond-Like Carbon Films Prepared by Ion Beam-Assisted Deposition

Effects of deposited particle energy on the structure and properties of diamond-like carbon films

Study on W Graded Doping Dlc Composite Films with Multicomponent Transition Layer

Structural Characters and Tribological Properties of Diamondlike Carbon Films

Effects of Tungsten Pre-Implanted Layer on Corrosion and Electrochemical Characteristics of Amorphous Carbon Films on Stainless Steel

Improvement of Adhesion Strength of Amorphous Carbon Films on Tungsten Ion Implanted 321 Stainless Steel Substrate

Magnetron Sputtering Preparation of Diamond-Like Carbon Film Adhesion Characteristics Research

Deposition of DLC coating on biomedical TiNi alloys by plasma based ion implantation to improve surface properties