Abstract:Taking Al-2%mole-Cu binary alloy as an example, the influence of grain orientation on competitive growth of dendrites under different competitive modes was investigated by using the three-dimensional (3-D) phase-field method. The result of phase-field simulation was verified by applying cold spray and directional remelting. In the simulation process, two competitive modes were designed: in Scheme 1, the monolayer columnar grains in multilayer columnar crystals had different orientations; while in Scheme 2, they had the same orientation. The simulation result showed that in Scheme 1, the growth of the dendrites, whose orientation had a certain included angle with the direction of temperature gradient, was restrained by the growth of other dendrites whose direction was parallel to the direction of temperature gradient. Moreover, the larger the included angle between the grain orientation and temperature gradient, the earlier the cessation of dendrite growth. The secondary dendrites of dendrites whose grain orientation was parallel to the temperature gradient flourished with increasing included angles between the grain orientation and temperature gradient. In Scheme 2, the greater the included angle between grain orientation and temperature gradient, the easier the dendrites whose orientation showed a certain included angle with temperature gradient inserted between those grew parallel to the temperature gradient, and the better the growth condition thereafter. Some growing dendrites after intercalation were deflected to the temperature gradient, and the greater the included angle, the lower the deflection. The morphologies of the competitive growth dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the two modes of competitive growth of dendrites characterized in the simulation do exist and frequently appear in practical solidification processes.

A study on the orientation relationship between Ti3SiC2 and TiC grains

Orientation Relationship and Interfacial Structure Between Ζ-Ti5si3 Precipitates and Γ-Tial Intermetallics

A Study on the Microtexture of Ti3sic2 Grains

Analysis on preferred orientation and purity estimation of Ti3SiC2

Growth model and morphology of Ti3SiC2 grains

Tensile Properties and Fracture Mechanism of the Ti2AlC(0001)/TiAl(111) Interface: Insights from a First-Principles Study

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Crystal orientation-dependent superconductivity in titanium nitride films

A study on powder X-ray diffraction of Ti3SiC2

A study on the reaction mechanism and growth of Ti3SiC2 synthesized by hot-pressing

Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

Orientation effect on / phase interface mediated deformation mechanism in titanium alloy

Orientation relationships and interfaces between NiAl and G-phase Ni16Hf6Si7

Theoretical analysis of Si3N4/TiC interfacial properties and material preparation

On the Orientation Relationship Between A2precipitates and the B2 Phase in a Ti-47at.%Al-2at.%W-0.5at.%Si Alloy

On the Orientation Relationship Between Ti5Si3 Precipitates and B2 Phase in a Ti-47Al-2W-0.5Si Alloy

Fine study of hierarchical interphase constructed by Ti3SiC2 and carbon nanotubes in SiCf/SiC composites

Effects of texture orientation in Ti3SiC2 on growth kinetics of interfacial compound layers in diffusion bonded TiAl/Ti3SiC2 joints

Different Routes to the Formation of C54tisi(2) in the Presence of Surface and Interface Molybdenum: A Transmission Electron Microscopy Study

First-principles study on TiC/TiN heterogeneous nucleation interface in high-titanium steel

Precipitation behaviors and orientation evolution mechanisms of α phases in Ti-55511 titanium alloy during heat treatment and subsequent hot deformation