Abstract:Taking Al-2%mole-Cu binary alloy as an example, the influence of grain orientation on competitive growth of dendrites under different competitive modes was investigated by using the three-dimensional (3-D) phase-field method. The result of phase-field simulation was verified by applying cold spray and directional remelting. In the simulation process, two competitive modes were designed: in Scheme 1, the monolayer columnar grains in multilayer columnar crystals had different orientations; while in Scheme 2, they had the same orientation. The simulation result showed that in Scheme 1, the growth of the dendrites, whose orientation had a certain included angle with the direction of temperature gradient, was restrained by the growth of other dendrites whose direction was parallel to the direction of temperature gradient. Moreover, the larger the included angle between the grain orientation and temperature gradient, the earlier the cessation of dendrite growth. The secondary dendrites of dendrites whose grain orientation was parallel to the temperature gradient flourished with increasing included angles between the grain orientation and temperature gradient. In Scheme 2, the greater the included angle between grain orientation and temperature gradient, the easier the dendrites whose orientation showed a certain included angle with temperature gradient inserted between those grew parallel to the temperature gradient, and the better the growth condition thereafter. Some growing dendrites after intercalation were deflected to the temperature gradient, and the greater the included angle, the lower the deflection. The morphologies of the competitive growth dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the two modes of competitive growth of dendrites characterized in the simulation do exist and frequently appear in practical solidification processes.

Growth model and morphology of Ti3SiC2 grains

Edge Reconstruction-Dependent Growth Kinetics of MoS2

A study on the orientation relationship between Ti3SiC2 and TiC grains

Formation and growth mechanism of TiC crystal in TiCp/Ti composites

A Study on the Microtexture of Ti3sic2 Grains

Growth of TiC Octahedron Obtained by Self-Propagating Reaction

A study on the reaction mechanism and growth of Ti3SiC2 synthesized by hot-pressing

Analysis on preferred orientation and purity estimation of Ti3SiC2

Microstructure and Growth Model of TiC Dendritic Crystals Produced by Laser Surface Alloying Technique

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Morphologies and Growth Mechanism of (tinb)c in TiNb-based Surface Reinforced Layer

Multi-length Scale Monte Carlo Simulation of the Growth Process of SiC Film by Chemical Vapor Deposition

Reaction behaviors and specific exposed crystal planes manipulation mechanism of TiC nanoparticles

Grain Growth Behavior in Tac-Modified Ultrafine Ti(C, N)-Based Cermets

Growth Mechanism of Reinforcements in In-Situ Synthesized （tib+tic）/ti Composites

Texture-Differentiated Grain Growth in Silicon Steel: Experiments and Modeling

Layered growth of Ti2AlC and Ti3AlC2 in combustion synthesis

Layered Growth Model and Epitaxial Growth Structures for Sicaln Alloys

Investigation on the Mechanism of Instability for Step Morphology During 3C-Sic (111) Vicinal Surface Epitaxial Growth

Analysis of Growth Mechanism of Dendritic Titanium Carbides Produced by Laser Alloying of Pure Titanium with Graphite Powder

Modeling of Aluminum-Silicon Irregular Eutectic Growth by Cellular Automaton Model