Abstract:The crystal model of NaCl-type FCC-TiC (1− x ) N x was established, and the crystal structure of nonstoichiometric TiC (1− x ) N x was optimized by first-principles calculation method. The binding energy, formation energy, elastic modulus, density of states (DOS) and charge density of TiC (1− x ) N x were calculated. The crystal structure, electronic structure and mechanical properties of TiC (1− x ) N x were studied. The effects of bonding types and bonding properties on the mechanical properties were analyzed. The results show that the optimized TiC (1− x ) N x crystal structure, with the increase in N content, lattice constant and cell volume decrease, TiN crystal structure is easy to form, and its thermodynamics is the most stable. The analysis of B/G, B/C44, Cauchy pressure and Poisson's ratio shows that TiC has the highest brittleness, and TiN has the best toughness, while TiC (1− x ) N x is between TiC and TiN. The covalent bonds are mainly Ti-C and Ti-N bonds, but there are also a certain number of C-N bonds, Ti-C and Ti-N ionic bonds, and Ti-Ti metallic bonds. The doping of N changes the interaction force between the electrons in the metallic d layer and the non-metallic 2p orbital electrons, and also changes the interaction force between the electrons in the metallic bond d layer, thus affecting the hardness and toughness of TiC (1− x ) N x . As C atoms are gradually replaced by C atoms in the TiC (1− x ) N x crystal structure, the density of states at EF gradually increases, which leads to the enhancement of the metal bond Ti d –Ti d , thereby improving the conductivity of the material. The transition from Ti–C bond to Ti–N bond leads to the decrease in covalent bond, the enhancement of ionic property, the increase in hardness and the decrease in toughness. The nonstoichiometric TiC (1− x ) N x powders were synthesized by carbothermal reduction technique, and the lattice constants obtained by XRD were basically consistent with the calculated values. XPS analysis shows that there are Ti–C, Ti–N, C–C and C–N bonds in TiC (1− x ) N x . The experimental results are in good agreement with the calculated electronic structure and bond type, which indicates the reliability of the crystal model and calculation method.

First-principles study on TiC/TiN heterogeneous nucleation interface in high-titanium steel

First principles study on heterogeneous interfaces of TiCu alloys through aluminum addition

Tensile Properties and Fracture Mechanism of the Ti2AlC(0001)/TiAl(111) Interface: Insights from a First-Principles Study

Ab initio calculations on the Mg/TiN heterogeneous nucleation interface

Growth mechanism of MnS/Fe on TiN surface: First principle investigation

First-principles investigation of interface atomic arrangement and segregation behavior of solute elements in Al/TiC interface in TiC/2219 composites

A Hierarchical High-Throughput First Principles Investigation on the Adhesion Work, Interfacial Energy and Tensile Strength of NiTi2 (100)/Α-Al2o3 (0001) Interfaces

The segregation behavior of elements at the Ti/TiFe coherent interface: First-principles calculation

First principles calculations on Al/TiB 2 interfaces

Tensile properties and fracture mechanism of the Ti 2 AlC(0001)/TiAl(111) interface: Insights from a first-principles study

Electronic structures and properties of TiAl/Ti2AlNb heterogeneous interfaces: A comprehensive first-principles study

Chemical bonding, thermodynamic stability and mechanical strength of Ni3Ti/α-Al2O3 interfaces by first-principles study

Strength of Cu-TiN and Al-TiN interfaces from first-principles

Precipitation Behavior of TiN During the Solidification of High-Titanium Steel

In Situ Observation of the Precipitation, Aggregation, and Dissolution Behaviors of TiN Inclusion on the Surface of Liquid GCr15 Bearing Steel

Microscopic mechanism of the effect of Nb and Cr co-doping on the strength and ductility of Ti2AlC/Ti3Al coherent interface

Investigation of the mechanical properties of TiC particle-reinforced Al-Cu alloys: insights into interface precipitation mechanisms and strengthening effects

3-D Ti/TiN Interface

Control of Coarse Precipitates of Titanium Nitride in High-Strength Low-Alloy Steel

First-Principles Study on the Mechanical Properties and Electronic Structure of Nonstoichiometric TiC(1−x)Nx

First-principles calculations of the effects of the interface microstructure on the wettability of a Cu–Ti/AlN system