Abstract:Flexible ultrafine SiC fibers with superior high-temperature stability and excellent oxidation resistance are regarded as one of the most promising materials for high-temperature applications. However, excess oxygen and carbon in the ultrafine SiC fibers limit their thermal stability due to decomposition of the SiCxOy phase. In the present work, flexible ultrafine nearly stoichiometric polycrystalline SiC fibers were fabricated by combining the electrospinning technique and polymer-derived ceramic method. The ultrafine SiC fibers exhibited superior high-temperature stability and oxidation resistance. The retention rates of tensile strength were 90.0 %, 94.2 % and 86.4 % after heat treatment in argon at 1800 °C, 1900 °C and 2000 °C, respectively. TG results of the fibers showed little weight loss of only 1.52 % at 1900 °C in Ar and the weight gain of only 4.1 % up to 1500 °C in air. Such improved thermal stability was achieved through sintering at high temperature for elimination of excess oxygen and carbon with Al doped as the sintering aid to restrain the grain coarsening. The ultrafine SiC fibers still exhibited excellent flexibility without obvious damage when they were heated by the butane blowtorch flame of about 1100 °C in air. Furthermore, the infrared thermography illustrated that the ultrafine SiC fiber membrane also had good thermal insulation performance. The outstanding mechanical properties and thermal stability of ultrafine SiC fibers suggest their potential applications at the high temperature and harsh environment.

Behavior of Electrical Resistance of SiCCVD Fiber and Development of Micro-Heater with SiCCVD Fiber

Behavior of electrical resistance of SiC CVD fiber and development of micro-heater with SiC CVD fiber

Effect of heat treatment on the microstructure and properties of CVD SiC fiber

Experimental Study on Thermal Transport Property of KD-II SiC Fiber

SiC fibers with different diameters exhibiting excellent high-temperature resistance and oxidation resistance

High-temperature resistance and thermal insulation performance of continuous SiMOC ceramic fibers fabricated by the modified sol-gel method combined with dry spinning

Development of Electric Heating Actuators of Fiber Reinforced Metal Composite

Structural evolution and mechanical properties of Cansas-III SiC fibers after thermal treatment up to 1700 °C

Thermal stability of CVI and RMI SiC/SiC composites adopting Cansas 3303 SiC fibers

Flexible ultrafine nearly stoichiometric polycrystalline SiC fibers with excellent oxidation resistance and superior thermal stability up to 1900 °C

The fiber structure evolution and performance changes of SiC–ZrC fibers after 1600 °C heat treatment

Study of online tensile properties for continuous ceramic fibers under high‐temperature loads

Preparation and high-temperature properties of skin–core structure SiC ceramic fibers

Temperature field regulation and growth mechanism of SiC fiber during microwave synthesis with catalyst assistance

Long-time oxidation behavior of the nearly stoichiometric polycrystalline SiC fibers under air atmosphere at different temperatures

Tensile Properties of Two-Dimensional Carbon Fiber Reinforced Silicon Carbide Composites at Temperatures Up to 1800 °C in Air

High-temperature tensile behavior of 3D SiC/SiC composites

Experimental Study of High-Temperature Tensile Mechanical Properties of 3D Needled C/C–SiC Composites

Evolution of microstructure and mechanical properties of SiCf/SiC composites induced by He ions irradiation at various temperatures

Effect of long-time annealing at high temperature on the microstructure and mechanical properties of different types of SiC fibers

Thermal Expansion Behavior of Carbon Fiber Reinforced Chemical-Vapor-infiltrated Silicon Carbide Composites from Room Temperature to 1400 °C