Abstract:Abstract Ceramic membranes are now receiving greater attention and are regarded as the best alternative option for reducing energy use. There are currently a number of limitations on the use of ceramic membranes, including high raw material costs and high sintering temperatures during synthesis. Cost‐effective raw materials were employed in the synthesis of ceramic membranes to get around these restrictions. Utilizing a straightforward pressing technique, circular disc‐type membranes were prepared. To assess the membrane properties, the impact of sintering temperatures between 700 and 900°C was examined. By varying the sintering temperature, the average membrane pore diameter was observed. The membrane, which was sintered at 800°C, had pores that were on average 110 nm in size. Furthermore, the porosity of these synthesized membranes ranged from 22% to 35% with an average pore diameter of 74–121 nm. These manufactured membranes showed very good chemical stability when both acidic and basic solutions were used. Various characterization methods, including thermogravimetric analysis (TGA), x‐ray diffraction analysis (XRD), and scanning electron microscopy (SEM), were used. Thermo‐gravimetric investigation revealed that the synthesized cenosphere membrane required a minimum sintering temperature of about 700°C. The flux measured with deionized water and the applied transmembrane pressure showed an upward trend. The impact of sintering temperature on permeate flux was investigated. The results showed that as the sintering temperature increased from 700°C to 900°C, the flux reduced. It was determined that the synthesized membrane cost ₹1618.80/m 2 .

Preparation of Cordierite-Based Porous Ceramic Micro-Filtration Membranes Using Waste Fly Ash As the Main Raw Materials

Elaboration and Chemical Corrosion Resistance of Tubular Macro-Porous Cordierite Ceramic Membrane Supports

Preparation of Fly Ash-Based Porous Ceramic with Alumina as the Pore-Forming Agent

Cost-effective Tubular Cordierite Micro-Filtration Membranes Processed by Co-Sintering

Properties and performance of cordierite-bonded porous silicon carbide membrane prepared using waste fly ash and other oxide additives

Asymmetric porous cordierite hollow fiber membrane for microfiltration

Preparation of Porous Ceramic Support with Inorganic Filtration Membrane

Low-Temperature Preparation of Porous Cordierite Materials with Fly Ash and Magnesite

Fabrication and Characterization of Porous Cordierite Ceramics Prepared from Fly Ash and Natural Minerals

Cost-effective Macro-Porous Mullite-Corundum Ceramic Membrane Supports Derived from the Industrial Grade Powder

Reaction-Sintered Porous Mineral-Based Mullite Ceramic Membrane Supports Made From Recycled Materials

Highly Permeable Macroporous Cordierite Ceramics with Controlled Microstructure Produced by Particle-Stabilized Emulsions with a Reactive Thermal Treatment

Preparation of porous mullite ceramic supports from high alumina fly ash

Fabrication and characterization of low cost tubular mineral-based ceramic membranes for micro-filtration from natural zeolite

Formation and kinetics of porous cordierite from fly ash

Recycling of Fly Ash for Preparing Porous Mullite Membrane Supports with Titania Addition

Processing and microstructure-permeation properties of silica bonded silicon carbide ceramic membrane

Environment-oriented low-cost porous mullite ceramic membrane supports fabricated from coal gangue and bauxite

Cost-effective Utilization of Mineral-Based Raw Materials for Preparation of Porous Mullite Ceramic Membranes Via In-Situ Reaction Method

Study on the preparation of ceramic membrane support and its Fe migration rule by high‐aluminum fly ash as raw material

Porous cenosphere ceramic microfiltration membrane: Preparation, characterization, permeability evaluation, and cost estimation