Abstract:Silicon carbide (SiC) membrane has emerged as a promising class of inorganic ceramic membranes with many advantageous attributes and has been used for a variety of industrial microfiltration (MF) processes. The state-of-the-art industrial manufacturing of SiC membranes based on the particle sintering method can only achieve an average pore size that ranges from 40 nm to a few micrometers, which is still unsatisfactory for ultrafiltration (UF) applications. Thus, the pore size control of SiC membranes remains a focus of continuing study. Herein, we provide an in situ sol–gel modification strategy to tailor the pore size of SiC membranes by a superficial deposition of SiO2 onto the membrane surface and membrane pore channels. Our in situ sol–gel modification method is simple and effective. Furthermore, the physical characteristics and the filtration performance of the membrane can easily be controlled by the in situ reaction time. With an optimal in situ reaction time of 30 min, the average pore size of the membrane can be reduced from macropores (400 nm) to mesopores (below 20 nm), and the retention ability for 20 nm fluorescent PS microspheres can be improved from 5% to 93%; the resultant SiC/SiO2 composite membranes are imparted with water permeance of 77 L·m−2·h−1·bar−1, improved anti-protein-fouling properties, excellent performance, and anti-acid stabilities. Therefore, modified SiC/SiO2 membranes based on the in situ sol–gel process have great potential as UF membranes for a variety of industrial processes.

Processing and microstructure-permeation properties of silica bonded silicon carbide ceramic membrane

Tuning Microstructures and Separation Behaviors of Pure Silicon Carbide Membranes

Silicon carbide ceramic membrane support sintered at 800 °C with low-temperature sintering aid

Preparation of a High-Performance Porous Ceramic Membrane by a Two-Step Coating Method and One-Step Sintering

In-situ Grown Columnar Mullite Reinforced SiC Porous Ceramic Membrane Support with Excellent Mechanical Performance and Corrosion Resistance: Using TiO2 As the Key to Form Columnar Mullite

Preparation Sic Ceramic Composite Filtration Membrane Materials by Dry Pressing and Synchronous Sintering Method

Low-temperature sintering of silicon carbide membrane supports from disks to single- and 19-channel tubes

Compact SiOC Ceramic Composite Nanofiltration Membranes by Slow Dip Coating for Water Purification

Evaporation-condensation Derived Silicon Carbide Membrane from Silicon Carbide Particles with Different Sizes

Fabrication of high-performance recrystallized silicon carbide ceramic membrane based on particle packing optimization

Zirconia ultrafiltration membranes on silicon carbide substrate: microstructure and water flux

Preparation and Characterization of SiC Composite Filtration Membrane Materials

The Influence of Sintering Temperature on Properties of Silicon Carbide Porous Ceramic Filter Membrane

Permeability Behavior and Wastewater Filtration Performance of Mullite Bonded Porous SiC Ceramic Membrane Prepared Using Coal Fly Ash as Sintering Additive

SiO2 Modification of Silicon Carbide Membrane via an Interfacial In Situ Sol–Gel Process for Improved Filtration Performance

Fabrication of high-performance SiC ceramic membranes modified using in situ grown mullite whiskers and high-temperature filtration

Properties and performance of cordierite-bonded porous silicon carbide membrane prepared using waste fly ash and other oxide additives

Reaction-bonded robust SiC ceramic membranes sintered at low temperature with coal gangue

Fabrication of high permeability SiC ceramic membrane with gradient pore structure by one-step freeze-casting process

Influence of additive contents on the properties of SiC ceramic membranes and their performance in oil‐water separation

Relation Between Porosity and Permeability of Ceramic Membrane Supports