Abstract:The influences of substrate bias on the properties of carbon nitride thin films, prepared by plasma assisted pulsed laser deposition, are reported. We demonstrated the feasibility of preparation of carbon nitride thin films containing high nitrogen content. A reactive nitrogen plasma was provided by electron cyclotron resonance (ECR) microwave discharge in nitrogen gas. Target ablation and film preparation were performed in the nitrogen plasma environment, with the growing films being concurrently bombarded by the low-energy nitrogen plasma stream. Rutherford backscattering spectroscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and Raman spectroscopy were used for composition determination and structure analysis. Films consisting homogeneously of carbon and nitrogen were obtained on Si (100) substrates at low temperatures (<80 °C), with nitrogen content over 50 at.% depending on the bias voltage applied to the substrates. Structural analysis reveals that nitrogen and carbon in the films are bonded through hybridized sp2 and sp3 configurations and the prepared films can be considered as a compound containing amorphous carbon phase, N-bonded sp2 and sp3 hybridized carbon. Besides the composition dependence on the substrate bias voltage, strong influences of the bias voltage on deposition rate and bonding configuration was also observed. The large amount of highly activated nitrogen species created by ECR discharge is expected to be responsible for efficient nitrogen incorporation, bonding formation and film growth. The subsequent surface reactions promoted by the energetic active nitrogen plasma stream enhance the growth of carbon nitride films, while excessive bombardment of the growing film by the plasma stream with higher energies was observed to decrease nitrogen content and deposition rate due to re-sputtering effect.

Effects of deposition parameters on deposition rate of B-C-N film prepared by magnetron sputtering

Effect of the Deposition Parameters on the Mechanical Properties of Ti-B-C Films Deposited by Magnetron Sputtering

Effects of technological parameters in magnetron sputtering process on properties of metallized films

Effect of Target Power on Nano-Scratch Behavior of BCN Films by D.c. Reactive Magnetron Sputtering

BN Films Deposited by HFPECVD and the Mechanism of the Process

Effect of Target Power and Bias on the Composition and Microstructure of BCN Films

Effect of deposition parameter on properties of AlSn20Cu coating prepared by magnetron sputtering

Optimizing hardness of CN x thin films by dc magnetron sputtering and a statistical approach

Effect of deposition angle on the deposition rate, microstructure, electrical and optical properties of magnetron sputtered ZrB 2 thin films

A Study of Nano-Mechanical Properties and Nano-Scratch Behavior of Boron Carbonitride Films.

Effect of Sputtering Deposition Parameters on Mechanical Properties,Microstructure and Composition of TiAlN Coatings

Influence of Sputtering Process on the Deposition and Optical Properties of Sicn Films

Investigation of BCN Films Deposited at Various$hboxN_2/hboxAr$Flow Ratios by DC Reactive Magnetron Sputtering

Magnetron sputtering deposition Ti–B–C–N films by Ti/B4C compound target

Investigation of Carbon Nitride Films Deposited by Ion Beam-Assisted Deposition with Low Bombarding Energy of N Ions

Investigation of deposition parameters on the structural properties and hardness of TiAlN films deposited via reactive pulsed DC magnetron sputteringInvestigation of deposition parameters on structural properties and hardness of TiAlN films deposited by reactive pulsed DC magnetron sputtering

Effect of the deposition conditions on the morphology and bonding structure of SiCN films

On the effects of processing variables on the composition and microstructure of ion beam enhanced deposition (IBED) Si3N4 film

EFFECTS OF DEPOSITION TEMPERATURE ON PROPERTIES OF NIOBIUM FILMS DEPOSITED BY DC MAGNETRON SPUTTERING

cBN Film and Its Research Progress in Sputtering Deposition

Influences of substrate bias on the composition and structure of carbon nitride thin films prepared by ECR-plasma assisted pulsed laser deposition