Abstract:The existing I 2 C interfaces require significant CPU intervention for data communication. In SOC systems, when using internally integrated I 2 C modules as masters, software control of I/O ports is necessary to emulate the I 2 C protocol for data transmission. This paper proposes a Mini I 2 C bus interface circuit design scheme that supports both master and slave modes. The I 2 C interface features minimal CPU intervention during data transmission, ease of use, small circuit area, and low power consumption. Additionally, the internal state machine design employs independent finite state machines (FSMs) for master and slave modes, enabling flexible configuration of the I 2 C module to operate in either mode. In comparison to reference (ShenZhen in Microelectronics Technology CO.BJ8M306A, Datasheet.2019.12.2., 2019), the proposed I 2 C solution reduces CPU instructions by 50% during data transmission, and by 33% compared to reference (GigaDevice Semiconductor Inc. GD32F1x0, Datasheet, 2022). After DC synthesis, the proposed design occupies only 14% of the area and consumes only 3.6% of the power of the Open Source I 2 C Design (Forencich in verilog-i2c. GitHub repository. Retrieved from https://github.com/alexforencich/verilog-i2c, n.d.). Therefore, this design scheme is better suited for low-power systems. The proposed design was validated through simulation using Xilinx ISE 14.7 with a SPARTAN 3 FPGA model xc3s500e-5pq208, and finally implemented using Huahong 95 nm CMOS technology, demonstrating high integration and low power consumption.

Low Pin Count Interface for USB2.0 Host Controller in SOC System

Design and Implementation of the High-Performance Link Layer in High-Speed Serial Communication

Design of Phase Locked Loop Applying to USB Full Speed Equipment

A Novel Physical-Layer Transceiver Used in USB2.0 Serial Data Link

Design of Data Communication Interface of Data Acquirement System Based on USB

Design of monolithic Phase-Locked Loop circuit for high-speed serial data link

Research on Software-hardware Co-design Methodology for USB2.0 Host Controller in SoC System

The Design and Development of USB 2.0 Interface IP Core

Implementation of a USB2.0 Device Based on SOPC

USB Peripheral Device and its FPGA Implementation

Design of USB Interface Base on I~2C Bus

A mini I2C bus interface circuit design and its VLSI implementation

Design and Implementation of USB1.1 Controller

Hierarchical Timing-driven Layout Based on .25um Technology

Design and Realization of Low Cost USB Protocol Converter

USB Communication Interface Design Based on the PDIUSBD11

Design of USB HID Device Based on Single Chip C8051f340

A Low-Cost and High-Throughput NoC-Aware Chip-to-Chip Interconnection

Design of Multi-serial Communication for Flight Controlling Computer Based on FPGA

An Efficient and Low-Overhead Chip-to-Chip Interconnect Protocol Design for NOC

USB2 . 0 transceiver logic circuit design based on UTMI specification