Abstract:A low power and low phase noise phase-locked loop (PLL) design for low voltage (0.8 V) applications is presented. The voltage controlled oscillator (VCO) operates from a 0.5 V voltage supply, while the other blocks operate from a 0.8 V supply. A differential NMOS-only topology is adopted for the oscillator, a modified precharge topology is applied in the phase-frequency detector (PFD), and a new feedback structure is utilized in the charge pump (CP) for ultra-low voltage applications. The divider adopts the extended true single phase clock DFF in order to operate in the high frequency region and save circuit area and power. In addition, several novel design techniques, such as removing the tail current source, are demonstrated to cut down the phase noise. Implemented in the SMIC 0.13 mu m RF CMOS process and operated at 0.8 V supply voltage, the PLL measures a phase noise of -112.4 dBc/Hz at an offset frequency of 1 MHz from the carrier and a frequency range of 3.166-3.383 GHz. The improved PFD and the novel CP dissipate 0.39 mW power from a 0.8 V supply. The occupied chip area of the PFD and CP is 100 x 100 mu m(2). The chip occupies 0.63 mm(2), and draws less than 6.54 mW from a 0.8 V supply.

Design of Phase Locked Loop Applying to USB Full Speed Equipment

Design of monolithic Phase-Locked Loop circuit for high-speed serial data link

Design and Implementation of the High-Performance Link Layer in High-Speed Serial Communication

Design of All-digital Clock Recovery Unit Based on USB Device

Design of Charge Pump for High-Speed Phase-Locked Loop

A Novel Multiphase Clock Generator Based on Digital DLL Designed for Oversampling in Transceiver

A 0.8 V Low Power Low Phase-Noise Pll

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

Design of a Fast- Lock PLL with Adaptive Control

Design of Digital Phase Locked Loop Used in SDH Equipment Clock

Design and simulation optimization of phase-locked loop structure for phase-shifting power supply

A simple method to design phase-locked LOs for CDMA mobile communications systems using CAD tools

A Novel Fast-Lock-in Digitally Controlled Phase-Locked Loop.

Low Voltage Phase-Locked Loop with Stabilized Bandwidth

Algorithms Based on All-Digital Phase-Locked Loop for Fast-Locking and Spur Free

Hybrid Phase-Locked Loop with Fast Locking Time and Low Spur in a 0.18-Μm CMOS Process

Design Of Low-Jitter 1-Ghz Phase-Locked Loops For Digital Clock Generation

The Design of an All-Digital Phase-Locked Loop with Low Jitter Based on ISF Analysis

A Time Synchronization Mechanism and Algorithm Based on Phase Lock Loop

Design and simulation of a PLL for use in a W-CDMA RF module

Analysis and Design of a Sub-Sampling PLL of Low Phase Noise and Low Reference Spur