Abstract:Agile development is considered as an emerging trend in hardware design, and NoC-based multi-IP integrated system has become the mainstream solution. The most critical challenge of this solution is to design a common efficient NoC with ultra-high throughput and low-cost routers to meet the communication characteristics of varied applications. Usually, NoC can not achieve both the gains from high throughput and low cost because high-throughput router architectures need complex virtual channel control logic to ensure that the power consumption and area of buffers will not be too large. Meanwhile, the low-cost router architecture is difficult to achieve higher throughput by increasing the number of buffers due to its simple control circuits. Moreover, most routers in NoC are optimized only for specific applications. To address the problem, this paper presents a “viaduct theory” for throughput optimization and realizes a common NoC router architecture for different scenario requirements (CRAFT router). Firstly, we improve the top boundary of the router throughput with the fully-connected crossbar switch, which is an expensive solution for high throughput. Secondly, we use a method similar to the ring-decouple theory in low-cost routers to reduce the number of router buffers while maintaining high throughput. The experimental results show that the throughput for the low-cost program is 15.4% higher than the conventional router with the same overhead. For the high-performance program, our router saves 50% hardware overhead compared with fully-connected routers with the same throughput; The maximum throughput that can be achieved is 26.3% higher than conventional routers, and 14.2% higher than the other state-of-the-art designs.

A Low-Cost and High-Throughput NoC-Aware Chip-to-Chip Interconnection

An Efficient and Low-Overhead Chip-to-Chip Interconnect Protocol Design for NOC

A Low-Cost and High-Throughput Virtual-Channel Router with Arbitration Optimization

A Tightly Coupled Network-on-Chip Router Architecture

A Low-Latency and Low-Power Hybrid Scheme for On-Chip Networks

Dual-link interconnect architecture for 3-D Mesh-based network on chip

System Level Interconnect Design for Network-on-chip Using Interconnect IPs.

Dual-Link Hierarchical Cluster-Based Interconnect Architecture for 3D Network on Chip

Interconnect intellectual property for network-on-chip (NoC)

A Guaranteed-Throughput Switch For Network-On-Chip

Hybrid Circuit-Switched NOC for Low Cost On-Chip Communication

Lightweight Network-on-chip Router on Research and Design

A Low Latency Variance NoC Router

Fpga Prototype Design Of Network On Chips

TrafficLite: A Configurable On-Chip Interconnect Router Microarchitecture

NeuronLink: An Efficient Chip-to-Chip Interconnect for Large-Scale Neural Network Accelerators

Latency Criticality Aware On-Chip Communication

A High-Performance Low-Power Nanophotonic On-Chip Network

Lateral Asynchronous and Vertical Synchronous 3D Network on Chip with Double Pumped Vertical Links.

CRAFT: Common Router Architecture for Throughput Optimization.

Dual-Channel Access Mechanism for Cost-Effective NoC Design